Q2
Selecciona los filamentos que quieres comparar
Selected:
All filaments
ABS-GF25
Shop now >
ABS Rapido
Shop now >
ABS Rapido Metal
Shop now >
ASA
Shop now >
ASA-Aero
Shop now >
ASA-CF20 Core
Shop now >
Odorless ABS
Shop now >
PA12-CF
Shop now >
PAHT-CF
Shop now >
PAHT-GF
Shop now >
PC-ABS-FR
Shop now >
PEBA 95A
Shop now >
PET-CF17
Shop now >
PET-GF
Shop now >
PETG Basic
Shop now >
PETG-CF
Shop now >
PETG-GF
Shop now >
PETG Rapido
Shop now >
PETG-Tough
Shop now >
PETG Translucent
Shop now >
PLA Basic
Shop now >
PLA-CF
Shop now >
PLA Matte Rapido
Shop now >
PLA Matte Basic
Shop now >
PLA Rapido
Shop now >
PLA Metal
Shop now >
PLA Silk
Shop now >
PLA-Wood
Shop now >
PPS-CF
Shop now >
PPS-GF20
Shop now >
S-White
Shop now >
TPU-Aero
Shop now >
TPU-GF
Shop now >
TPU95A-HF
Shop now >
Ultra PA-CF25
Shop now >
UltraPA
Shop now >
Propiedades del filamento
Fortaleza
Resistance to bending before failure. A higher value means the material withstands a greater bending load.
Resistencia a la flexión - XY
—
—
—
—
Rigidez
Resistance to deformation under load. A higher value means the printed part flexes less.
Módulo de flexión - XY
—
—
—
—
Adhesión de capas
Strength of the bond between printed layers in the Z direction. A higher value indicates stronger layer bonding.
Resistencia a la tracción - Z
—
—
—
—
—
—
—
—
—
—
—
Resistencia al calor
Heat deflection temperature under a 0.45 MPa load. A higher value indicates better shape retention under heat and load.
HDT, 0,45 MPa
—
—
—
—
Absorción de agua
Moisture absorbed at saturation. A lower value is generally better for dimensional stability and consistent printing.
Tasa de absorción de agua saturada
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Preparación previa a la impresión
Secar antes de usar
¿Es muy recomendable secar?
Required
Optional
Optional
Optional
Optional
Required
Optional
Required
Required
Required
Required
Required
Required
Required
Optional
Required
Required
Optional
Optional
Optional
Optional
Required
Optional
Optional
Optional
Optional
Optional
Optional
Required
Required
Required
Required
Required
Required
Required
Required
Condición de secado
Temperatura del horno & tiempo
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 6-8 h
Blast Drying Oven: 80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80°C / 4-6 h
Blast Drying Oven: 60°C / 4-6 h
Blast Drying Oven: 100°C / 10 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 60-65°C / 4-6 h
Blast Drying Oven: 70°C / 4-6 h
Blast Drying Oven: 70°C / 4-6 h
Blast Drying Oven: 60-65°C / 4-6 h
Blast Drying Oven: 60-65°C / 6-8 h
Blast Drying Oven: 60-65°C / 4-6 h
Blast Drying Oven: 50°C / 4-8 h
Blast Drying Oven: 50°C / 4-6 h
Blast Drying Oven: 50-55°C / 4-6 h
Blast Drying Oven: 50-60°C / 4-6 h
Blast Drying Oven: 50-55°C / 4-6 h
Blast Drying Oven: 45-50°C / 4-6 h
Blast Drying Oven: 45-50°C / 4-6 h
Blast Drying Oven: 50-55°C / 4-6 h
Blast Drying Oven: 100°C / 10 h
Blast Drying Oven: 100°C / 10 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 60°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Compatibilidad con CAJA
<tc>QIDI BOX</tc> Compañero
Tamaño/material de la boquilla
Configuración de hardware recomendada
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
Placa de construcción
Temperatura de la cama & Tipo
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (80-110°C) / Smooth PEI plate with glue (80-110°C)
Textured PEI plate (80-110°C) / Smooth PEI plate with glue (80-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate with PVP glue (40-70°C) / Smooth PEI plate with PVP glue (40-70°C)
Textured PEI plate with PVP glue (70-90°C) / Smooth PEI plate with PVP glue (70-90°C)
Textured PEI plate with PVP glue (70-90°C) / Smooth PEI plate with PVP glue (70-90°C)
Textured PEI plate (100-110°C) / Smooth PEI or PC plate with glue (100-110°C)
Textured PEI plate (60-100°C) / Smooth PEI plate with release glue (60-100°C)
Textured PEI plate with PVP glue (70-80°C) / Smooth PEI plate with PVP glue (70-80°C)
Textured PEI plate with PVP glue (60-80°C) / Smooth PEI plate with PVP glue (60-80°C)
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C)
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (50-60°C) / Smooth PEI plate with glue (50-60°C) / Cool Plate (35-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (50-60°C) / Smooth PEI plate with glue (50-60°C) / Cool Plate (35-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate with PVP glue (100-110°C) / Smooth PEI plate with PVP glue (100-110°C)
Textured PEI plate with PVP glue (80-90°C) / Smooth PEI plate with PVP glue (80-90°C)
Textured PEI plate with PVP glue (60-80°C) / Smooth PEI plate with PVP glue (60-80°C)
Textured PEI plate (30-45°C) / Smooth PEI plate with release glue (30-45°C)
Textured PEI plate (35-50°C) / Smooth PEI plate with release glue (35-50°C)
Textured PEI plate (35-50°C) / Smooth PEI plate with release glue (35-50°C)
Textured PEI plate with PVP glue (70-80°C) / Smooth PEI plate with PVP glue (70-80°C)
Textured PEI plate with PVP glue (70-80°C) / Smooth PEI plate with PVP glue (70-80°C)
Configuración de la impresora
Imprimir con recinto
¿Requiere cámara cerrada?
Sellar con desecante
Requisito de almacenamiento
Velocidad de impresión
Rango de velocidad recomendado
30-120 mm/s
40-80 mm/s
40-80 mm/s
30-120 mm/s
30-90 mm/s
30-250 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
30-300 mm/s
30-120 mm/s
Up to 300 mm/s
30-120 mm/s
30-50 mm/s
40-150 mm/s
<=150 mm/s
<=300 mm/s
30-300 mm/s
30-50 mm/s
30-50 mm/s
100-200 mm/s
40-80 mm/s
30-50 mm/s
<=300 mm/s
40-80 mm/s
40-80 mm/s
40-80 mm/s
30-60 mm/s
Up to 250 mm/s
30-120 mm/s
<100 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
Temperatura de la boquilla
Rango de calor del extrusor
250-270°C
220-250°C
220-250°C
240-260°C
240-280°C
250-280°C
240-260°C
280-300°C
300-320°C
300-320°C
240-270°C
230-260°C
270-300°C
280-320°C
240-260°C
240-270°C
250-275°C
235-275°C
230-260°C
240-260°C
210-230°C
210-240°C
210-230°C
210-230°C
200-240°C
190-220°C
210-230°C
190-220°C
310-350°C
310-350°C
260-280°C
230-270°C
240-270°C
210-230°C
300-340°C
260-280°C
Ventilador de refrigeración parcial
Relación del ventilador de refrigeración
0-50%
0-80%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
50-100%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
50-100%
0-50%
50-100%
50-100%
50-100%
50-100%
50-100%
50-100%
0-50%
0-50%
0-50%
50-100%
50-100%
50-100%
0-50%
0-50%
Procesos de posimpresión
Recocido
Procesamiento poscurado
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
TDS Documents
Technical Data Sheet
View or download the product TDS