Software&Firmware
-
Slicer Software
-
QIDI Slicer
-
QIDI Print Slicer
-
-
3D Printers Firmware
-
X-Max3
-
X-Plus3
-
X-Smart3
-
Other Series
-
-
Open Source
-
Klipper&Software
-
Other Slicer Profiles
-
QIDI Slicer::before

For X-Max3,X-Plus3,X-Smart3 3D printers
QIDI Slicer 1.0.5
Updated: 23/8/2023
• Download • Release Notes
The QIDI slicer beta version for macOS has been released and it only supports 13.0.1 currently. The further versions will be compatible with past versions of macOS.
Introduction
• QIDI-Slicer Start Guide
QIDISlicer is a new professional 3D printer slicing software,which is perfectly compatible with all QIDI high speed printers(Klipper firmware) and high speed filaments of QIDI Technology.
Notice:Please make sure your firmware version is V 4.0.0 or above.
QIDISlicer is based on PrusaSlicer by Prusa Research, which is from Slic3r by Alessandro Ranellucci and the RepRap community. Thanks to PrusaSlicer and Bambulab for their contributions to the 3D printing community.
Notice:Please make sure your firmware version is V 4.0.0 or above.
QIDISlicer is based on PrusaSlicer by Prusa Research, which is from Slic3r by Alessandro Ranellucci and the RepRap community. Thanks to PrusaSlicer and Bambulab for their contributions to the 3D printing community.
QIDI TECH X-Plus3

Firmware
Updated: 2/9/2023
• V4.2.8 DownloadRelease Notes: https://github.com/QIDITECH/QIDI_PLUS3
1.Added factory reset of Z-offset
2.Display preview image on the screen normally when printing a file through a network page
1.Added factory reset of Z-offset
2.Display preview image on the screen normally when printing a file through a network page
Special Thanks:
Thanks to @Michael Kühlmann for the translation of the German interface of the firmware UI.
Thanks to @Odile for pointing out French UI issues.
If you have any suggestions with the firmware UI, please feel free to contact the after-sales service.
Thanks to @Odile for pointing out French UI issues.
If you have any suggestions with the firmware UI, please feel free to contact the after-sales service.
QIDI TECH X-Max3

Firmware
Updated: 2/9/2023
• V4.3.8 DownloadRelease Notes: https://github.com/QIDITECH/QIDI_MAX3
1.Added factory reset of Z-offset
2.Display preview image on the screen normally when printing a file through a network page
1.Added factory reset of Z-offset
2.Display preview image on the screen normally when printing a file through a network page
Special Thanks:
Thanks to @Michael Kühlmann for the translation of the German interface of the firmware UI.
Thanks to @Odile for pointing out French UI issues.
If you have any suggestions with the firmware UI, please feel free to contact the after-sales service.
Thanks to @Odile for pointing out French UI issues.
If you have any suggestions with the firmware UI, please feel free to contact the after-sales service.
QIDI TECH X-Smart3

Firmware
Updated: 2/9/2023
• V4.1.8 DownloadRelease Notes: https://github.com/QIDITECH/QIDI_SMART3
1.Added factory reset of Z-offset
2.Display preview image on the screen normally when printing a file through a network page
1.Added factory reset of Z-offset
2.Display preview image on the screen normally when printing a file through a network page
Special Thanks:
Thanks to @Michael Kühlmann for the translation of the German interface of the firmware UI.
Thanks to @Odile for pointing out French UI issues.
If you have any suggestions with the firmware UI, please feel free to contact the after-sales service.
Thanks to @Odile for pointing out French UI issues.
If you have any suggestions with the firmware UI, please feel free to contact the after-sales service.
Open Source

Caution:
Don't update the Klipper version yourself. Our printer Klipper will be updated with our customized version. The public version of Klipper does not match our motherboard.
And modifying Klipper may result in the printer not working, there may be some issues that we may not be able to help you remotely.
None of these are covered by warranty!
We developed Klipper based on a special version and added many new features. A stable version will help us develop better. If you have your own ideas for updating KLIPPER, we can provide a burner for you, and we can provide support and mirroring files. We will collate and open source all the firmware to facilitate customer modification and update. We will also provide methods for compiling. But it will take a while. Thank you very much for your patience, customers.
If you have any questions or suggestions, please feel free to contact the after-sales service.
Don't update the Klipper version yourself. Our printer Klipper will be updated with our customized version. The public version of Klipper does not match our motherboard.
And modifying Klipper may result in the printer not working, there may be some issues that we may not be able to help you remotely.
None of these are covered by warranty!
We developed Klipper based on a special version and added many new features. A stable version will help us develop better. If you have your own ideas for updating KLIPPER, we can provide a burner for you, and we can provide support and mirroring files. We will collate and open source all the firmware to facilitate customer modification and update. We will also provide methods for compiling. But it will take a while. Thank you very much for your patience, customers.
If you have any questions or suggestions, please feel free to contact the after-sales service.
Other Slicers Profiles

New Released Printers Profiles:
X-Max3,X-Plus3,X-Smart3
X-Max3,X-Plus3,X-Smart3
Orca-Slicer have supported all new QIDI high speed printer models
Learn more, Thanks to @fr3ak2402 and @softFever.
QIDI Other Series Printer Profiles:
QIDI Print Slicer::before

For QIDI I-Fast,X-CF pro, X-Max II,X-Max I,X-Plus II,X-Plus I,I-Mates,X-Smart,X-Pro,X-One/X-One2 3D Printers
QIDI Print Slicer 6.4.1
Updated: 2/2023
Introduction
QIDI Print is a professional 3D printer slicing software,which is compatible with all QIDI printers with Marlin firmware(Not including X-MAX3/X-PLUS3/X-SMART3).
Notice:QIDI Print Slicer 6.4.1 is incompatible with the QIDI's new high speed printers.
QIDI Print Slicer is based on Cura by UltiMaker. Thanks to UltiMaker and Other Developers for their contributions to the 3D printing community.
• Download
Notice:QIDI Print Slicer 6.4.1 is incompatible with the QIDI's new high speed printers.
QIDI Print Slicer is based on Cura by UltiMaker. Thanks to UltiMaker and Other Developers for their contributions to the 3D printing community.
For QIDI Tech I
QIDI Print Slicer 5.6.14
Updated: 2021
Introduction
This version is special for the some previous QIDI printers, such as QIDI Tech1 printer.
• Download