Q2
Выберите нити, которые хотите сравнить.
Selected:
All filaments
ABS-GF25
Shop now >
ABS Rapido
Shop now >
ABS Rapido Metal
Shop now >
ASA
Shop now >
ASA-Aero
Shop now >
ASA-CF20 Core
Shop now >
Odorless ABS
Shop now >
PA12-CF
Shop now >
PAHT-CF
Shop now >
PAHT-GF
Shop now >
PC-ABS-FR
Shop now >
PEBA 95A
Shop now >
PET-CF17
Shop now >
PET-GF
Shop now >
PETG Basic
Shop now >
PETG-CF
Shop now >
PETG-GF
Shop now >
PETG Rapido
Shop now >
PETG-Tough
Shop now >
PETG Translucent
Shop now >
PLA Basic
Shop now >
PLA-CF
Shop now >
PLA Matte Rapido
Shop now >
PLA Matte Basic
Shop now >
PLA Rapido
Shop now >
PLA Metal
Shop now >
PLA Silk
Shop now >
PLA-Wood
Shop now >
PPS-CF
Shop now >
PPS-GF20
Shop now >
S-White
Shop now >
TPU-Aero
Shop now >
TPU-GF
Shop now >
TPU95A-HF
Shop now >
Ultra PA-CF25
Shop now >
UltraPA
Shop now >
Свойства нити
Сила
Resistance to bending before failure. A higher value means the material withstands a greater bending load.
Прочность на изгиб - XY
—
—
—
—
Жесткость
Resistance to deformation under load. A higher value means the printed part flexes less.
Модуль изгиба - XY
—
—
—
—
Адгезия слоев
Strength of the bond between printed layers in the Z direction. A higher value indicates stronger layer bonding.
Предел прочности - Z
—
—
—
—
—
—
—
—
—
—
—
Теплостойкость
Heat deflection temperature under a 0.45 MPa load. A higher value indicates better shape retention under heat and load.
HDT, 0,45 МПа
—
—
—
—
Водопоглощение
Moisture absorbed at saturation. A lower value is generally better for dimensional stability and consistent printing.
Скорость поглощения насыщенной воды
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Предпечатная подготовка
Высушите перед использованием
Настоятельно ли рекомендуется сушить?
Required
Optional
Optional
Optional
Optional
Required
Optional
Required
Required
Required
Required
Required
Required
Required
Optional
Required
Required
Optional
Optional
Optional
Optional
Required
Optional
Optional
Optional
Optional
Optional
Optional
Required
Required
Required
Required
Required
Required
Required
Required
Условия сушки
Температура печи & время
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 6-8 h
Blast Drying Oven: 80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80°C / 4-6 h
Blast Drying Oven: 60°C / 4-6 h
Blast Drying Oven: 100°C / 10 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 60-65°C / 4-6 h
Blast Drying Oven: 70°C / 4-6 h
Blast Drying Oven: 70°C / 4-6 h
Blast Drying Oven: 60-65°C / 4-6 h
Blast Drying Oven: 60-65°C / 6-8 h
Blast Drying Oven: 60-65°C / 4-6 h
Blast Drying Oven: 50°C / 4-8 h
Blast Drying Oven: 50°C / 4-6 h
Blast Drying Oven: 50-55°C / 4-6 h
Blast Drying Oven: 50-60°C / 4-6 h
Blast Drying Oven: 50-55°C / 4-6 h
Blast Drying Oven: 45-50°C / 4-6 h
Blast Drying Oven: 45-50°C / 4-6 h
Blast Drying Oven: 50-55°C / 4-6 h
Blast Drying Oven: 100°C / 10 h
Blast Drying Oven: 100°C / 10 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 60°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Совместимость с коробкой
<tc>QIDI BOX</tc> Спутник
Размер сопла/материал
Рекомендуемые настройки оборудования
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
Строительная пластина
Температура слоя & Тип
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (80-110°C) / Smooth PEI plate with glue (80-110°C)
Textured PEI plate (80-110°C) / Smooth PEI plate with glue (80-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate with PVP glue (40-70°C) / Smooth PEI plate with PVP glue (40-70°C)
Textured PEI plate with PVP glue (70-90°C) / Smooth PEI plate with PVP glue (70-90°C)
Textured PEI plate with PVP glue (70-90°C) / Smooth PEI plate with PVP glue (70-90°C)
Textured PEI plate (100-110°C) / Smooth PEI or PC plate with glue (100-110°C)
Textured PEI plate (60-100°C) / Smooth PEI plate with release glue (60-100°C)
Textured PEI plate with PVP glue (70-80°C) / Smooth PEI plate with PVP glue (70-80°C)
Textured PEI plate with PVP glue (60-80°C) / Smooth PEI plate with PVP glue (60-80°C)
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C)
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (50-60°C) / Smooth PEI plate with glue (50-60°C) / Cool Plate (35-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (50-60°C) / Smooth PEI plate with glue (50-60°C) / Cool Plate (35-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate with PVP glue (100-110°C) / Smooth PEI plate with PVP glue (100-110°C)
Textured PEI plate with PVP glue (80-90°C) / Smooth PEI plate with PVP glue (80-90°C)
Textured PEI plate with PVP glue (60-80°C) / Smooth PEI plate with PVP glue (60-80°C)
Textured PEI plate (30-45°C) / Smooth PEI plate with release glue (30-45°C)
Textured PEI plate (35-50°C) / Smooth PEI plate with release glue (35-50°C)
Textured PEI plate (35-50°C) / Smooth PEI plate with release glue (35-50°C)
Textured PEI plate with PVP glue (70-80°C) / Smooth PEI plate with PVP glue (70-80°C)
Textured PEI plate with PVP glue (70-80°C) / Smooth PEI plate with PVP glue (70-80°C)
Настройки принтера
Печать с приложением
Требуется закрытая камера?
Герметизация с помощью осушителя
Требования к хранению
Скорость печати
Рекомендуемый диапазон скоростей
30-120 mm/s
40-80 mm/s
40-80 mm/s
30-120 mm/s
30-90 mm/s
30-250 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
30-300 mm/s
30-120 mm/s
Up to 300 mm/s
30-120 mm/s
30-50 mm/s
40-150 mm/s
<=150 mm/s
<=300 mm/s
30-300 mm/s
30-50 mm/s
30-50 mm/s
100-200 mm/s
40-80 mm/s
30-50 mm/s
<=300 mm/s
40-80 mm/s
40-80 mm/s
40-80 mm/s
30-60 mm/s
Up to 250 mm/s
30-120 mm/s
<100 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
Температура сопла
Диапазон нагрева экструдера
250-270°C
220-250°C
220-250°C
240-260°C
240-280°C
250-280°C
240-260°C
280-300°C
300-320°C
300-320°C
240-270°C
230-260°C
270-300°C
280-320°C
240-260°C
240-270°C
250-275°C
235-275°C
230-260°C
240-260°C
210-230°C
210-240°C
210-230°C
210-230°C
200-240°C
190-220°C
210-230°C
190-220°C
310-350°C
310-350°C
260-280°C
230-270°C
240-270°C
210-230°C
300-340°C
260-280°C
Часть охлаждающего вентилятора
Коэффициент охлаждающего вентилятора
0-50%
0-80%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
50-100%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
50-100%
0-50%
50-100%
50-100%
50-100%
50-100%
50-100%
50-100%
0-50%
0-50%
0-50%
50-100%
50-100%
50-100%
0-50%
0-50%
Послепечатные процессы
Отжиг
Обработка после отверждения
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
TDS Documents
Technical Data Sheet
View or download the product TDS