QIDI Q3D 3D Printer
QIDI Q3D 3D Printer
QIDI Q3D 3D Printer
QIDI Q3D 3D Printer
Price Protection 30-Day Price Match
Guarantee 14-Day No Reason Return
Warranty 1-Year Coverage
Expert Support Lifetime Tech Guidance

QIDI Q3D 3D Printer

販売価格$30.00 USD
/


QIDI Q3D — Materials without limits: dual nozzles, high-temp chamber, clog-free performance.

  • Build Volume: 260 × 260 × 260 mm
  • Dual-Head Printing: Multi-Material & Multi-Color
  • 70°C Gen-4 Heated Chamber with Dual Air Intake
  • 350°C Quick-Swap Nozzle
  • Next-Gen Eddy Current Sensor for First-Layer Precision
  • Precision Motion: X-Axis Linear Rails & Lightweight Design
  • Smart Controls: Full-Color Display & Status LEDs
🎁
Pre-order: Pay $30, Save $100
Reserve your Q3D with a fully refundable $30 presale payment and unlock a $100 discount.
Regular price $599
Presale discount −$100
Payment today $30
Balance due $499
Total payment (including presale payment) $529
Model
Option
Status

  • 在庫があり、出荷する準備ができています
  • バックオーダー、すぐに送料

先行販売特典: 30ドルを支払って100ドルのクレジットを確保 QIDI Q3D(商品価格:599ドル)。これは商品代金の全額ではありません。
仕組み:
1. 支払う  30ドルで予約を確定  100ドル  クレジット。
2.利用可能になり次第、499ドルの残金支払いリンクがメールで送信されます。
3.お支払いを完了して発送手配をしてください。
100%返金可能: あなたの  30ドルは、理由を問わずいつでも、手数料なしで元の支払い方法に全額返金されます。
重要な注意事項: 仮想クレジットのみ。クレジット購入に配送先住所や手数料は不要です。 QIDI Q3D限定。譲渡不可、分割不可、現金との交換不可。通知後7日以内に残金をお支払いください。未払いの注文には催促状が送付され、全額返金の上キャンセルされる場合があります。  返信がない場合は30ドル返金いたします。遅延が発生する場合はご連絡いたします。
配送予定時間: 注文および支払い完了後、約3ヶ月後。

QIDI Q3D

デュアルノズル、シンプルで効率的。

2 ノズル

インテリジェントなスイッチング

最高70℃

第 4 世代のチャンバー加熱

350℃まで

メインノズル強力出力

40% 高速化

従来の 2 色印刷との比較

Q3Dの注目ポイントを探ってみましょう

より効率的なデュアルマテリアル印刷のためだけに

<p>押出機の温度制御。スマート冷却、リアルタイムUI。</p>

押出機の温度制御。スマート冷却、リアルタイムUI。

デュアルノズル。 マルチマテリアルをシンプルに。
70°C Gen-4 チャンバー加熱
デュアルインテーク冷却設計
フラッグシップハードウェア。 渦センサーがリニアレールと接触します。
純粋な空気濾過。きれいなプリント、安全な呼吸。

廃棄ゼロ。廃棄物ゼロ。

二重素材サポートと混色印刷

独立したデュアルノズルを採用したQ3Dは、フィラメントの排出や材料の無駄を排除します。色や専用サポート材を瞬時に切り替えることができ、マルチマテリアル印刷時間をほぼ半分に短縮します。

<p>二重素材サポートと混色印刷</p>

スイッチ一つ一つに完璧さを。

軽量ツールヘッドを採用したQ3Dは、2つのホットエンドを非常に安定した状態でシームレスに切り替えることができ、毎回スムーズで信頼性の高い印刷と完璧な表面仕上げを実現します。

清潔で、パリッとした食感――毎回。

サポートの削除、完了しました。

サポート材の除去に苦労する必要はもうありません。すべてがきれいに分離し、シャープな仕上がりになります。

<p><strong>サポートの削除、完了しました。</strong></p>

ドローンフレーム

マテリアルが保存されました

41%

材料が少ない

従来のデュアルノズル
Q3D

印刷時間を節約

52%

もっと早く

従来のデュアルノズル
Q3D

一度の引き抜きで表面に傷跡を残さずに除去

クリーンなブレークアウェイ。完璧な仕上がり。

専用の第2ノズルで印刷されるため、サポート材は手で簡単にきれいに剥がすことができ、裏面は非常に滑らかでシャープな仕上がりになるので、思わず人に見せたくなるでしょう。

<p>クリーンなブレークアウェイ。完璧な仕上がり。</p>

温度を考慮して設計されています。

工業グレードの熱管理により、あらゆる素材の可能性が解き放たれる。限界はない。

押出機の気候制御

冷たい空気を、発生源へ直接届けます。

専用の冷却チャンネルが冷気を押出機に直接吹き付けます。温度は急速に低下し、目詰まりは最大90%減少します。その動作をUI上でリアルタイムに確認できます。

<p>冷たい空気を、発生源へ直接届けます。</p>

反りやひび割れのない、工業的な安定性。

第4世代チャンバー加熱、最高70℃まで対応

安定した均一なチャンバー加熱により、日常的なPLAから高温対応のエンジニアリングナイロンまで、あらゆる素材に対応。反りが少なく、層のひび割れもありません。

<p>第4世代チャンバー加熱、最高70℃まで対応</p>

シャープなオーバーハングとブリッジを実現する高速冷却。

デュアル外部吸気設計。

2つの外部吸気口が新鮮で冷たい空気を吸い込み、フィラメントを瞬時に固化させることで、あらゆる形状においてシャープなオーバーハングとフラットなブリッジを実現します。

<p>デュアル外部吸気設計。</p>

フラッグシップモデルのハードウェア。比類なき印刷品質。

次世代の渦流センサー、高精度リニアレール、そして超軽量デュアルホットエンドツールヘッドを組み合わせたQ3Dは、最初のレイヤーから最上層まで、完璧で一貫した印刷品質を実現します。

あらゆる状況下で揺るぎない安定性を実現。

次世代渦電流センサー

改良されたキャリブレーションアルゴリズムにより、ベッドのマッピングが自動的に行われ、あらゆる条件下で推測に頼ることなく、完璧な第一層を保証します。

<p>次世代渦電流センサー</p>

完璧さは第一層から始まる

すべての線が滑らかかつ均一に配置され、複雑なモデルのための強固な基盤を築きます。

精密な動作とマクロ実行の融合

工業グレードの直線レールとアクティブ振動補償を組み合わせることで、高速走行時の機械的共振を排除します。

鋭利な角と鏡のように滑らかな垂直壁を作り出す。

<p>精密な動作とマクロ実行の融合</p>
X軸リニアガイドレール
<p>精密な動作とマクロ実行の融合</p>
最新のカスタム1.5GTベルト

底面から上面まで、表面品質が均一です。

超軽量デュアルホットエンドツールヘッド

可動質量を最小限に抑えることで、急激な方向転換時の慣性が低減され、最初の1ミリメートルから最終的なピークまで、安定した押し出しと均一な表面テクスチャが保証されます。

<p>超軽量デュアルホットエンドツールヘッド</p>

工具不要の交換。高温対応のパワー。

フラッグシップモデル 350℃対応クイックスワップホットエンド

ノズルは工具不要で数秒で交換でき、最高350℃まで加熱できるため、高温対応のエンジニアリングフィラメントも簡単に印刷できます。

<p>フラッグシップモデル 350℃対応クイックスワップホットエンド</p>

次世代AIとスマートハードウェアのエコシステム

インテリジェントオートメーションと強化されたエクスペリエンス

微細な自動水平調整からリアルタイムのAI異常検知まで、インテリジェントな自動化により、シームレスで安心なワークフローが実現します。

ステータスが一目でわかる。

フルカラーディスプレイとスマートステータスLED

鮮明なフルカラータッチスクリーンで簡単に操作でき、内蔵のスマートLEDステータスバーは、スリープモードや印刷準備から印刷の進行状況まで、機械の状態を部屋中に表示します。

QIDl Box を搭載

ブラシレスモーター搭載。多彩なスピード。

工業グレードのブラシレスモーターで駆動し、 QIDI Box 強力で高トルクの出力を実現し、あらゆるスプールにおいてスムーズで滑りのないフィラメント送りを保証します。

3層構造の空気ろ過システムで、粒子の99.5%を捕捉します。

家庭の健康と安全のために設計されています

活発な空気循環により、高効率の3層フィルターカートリッジを通して空気が循環し、ほこり、超微粒子、臭いの99.5%を捕捉することで、室内の空気を新鮮で安全に保ちます。

ペットがすぐそばでぐっすり眠っている間、書斎で印刷作業をしましょう。

ささやくような静寂の住まい体験

防音モーションコントロールと低騒音ファンにより、印刷時の音は驚くほど静かです。そのため、ペットや家族が静かに休んでいる間も、書斎でプリンターを静かに稼働させることができます。

<p>ささやくような静寂の住まい体験</p>

安全性を超えて。お客様の体験を中心に構築されています。

堅牢な保護性能と人間工学に基づいた設計が融合。Q3Dのあらゆるディテールは、安心感と快適な日常使いのために設計されています。

インテリジェントな温度監視
難燃性チャンバー構造
平らで清掃しやすいチャンバー床
人間工学に基づいた埋め込み式持ち手
頑丈なオールメタルフレーム

なぜQ3Dなのか?

単なるプリンターではない。完璧な仕上がりを楽々と実現するために設計された、デュアルノズル搭載のフラッグシップモデルだ。

廃棄物ゼロのマルチマテリアル印刷、70℃の高温環境下でも安定した温度制御を実現するアクティブサーマルコントロール、そしてインテリジェントな自動化。これらすべては、あなたの最も大胆なアイデアを実現するために設計されています。

研究室からリビングルームまで、どこでも使えます

DIY愛好家、ご家族、デザイナー、そしてあなたに!

What's in the box

What's in the box - desktop
What's in the box - mobile

QIDI Q3D Technical Specifications

Print Size (W*D*H):Main Nozzle: 260*260*260 mm³
Auxiliary Nozzle: 240*260*255 mm³
Dual Nozzle: 240*260*255 mm³
Total Volume: 260*260*260 mm³

Printer Dimensions:405*475*441 mm

Package Dimensions:500*540*580 mm

Gross Weight:35 kg
Net Weight:29 kg Print Head Temperature:≤ 350℃

Printing Plate:Double-sided PEI Magnetic Build Plate

Hot Bed Temperature:≤ 120℃

Max Speed of Tool Head:600mm/s

Acceleration:≤20000mm/s^2
XY Structure:CoreXY, 7mm Width 1.5GT Belt X Axis:High Hardness Linear Guide Rail
Z Axis:10mm Linear Shafts and Screws Printing Platform:Aluminum Plate Silicone Heated Bed
Status RGB LED
Nozzle:Quick-Swap Bimetal Nozzle Nozzle Diameter:0.4mm (0.2/0.6/0.8mm Optional)
Extruder:Direct Extruder, Hardened Steel Dual Gears, Extruder Thermal Monitor (ETM)
Supported Filament (Main Hotend):PLA, ABS, ASA, PETG, TPU, PA, PC, Carbon/Glass Fiber Reinforced Polymer, etc.
Filament Diameter:1.75mm Multi-Color Printing:Compatible with QIDI Box (Multi-color)
Air filter:3-in-1 Air Filter: G3 Pre-Filter + H12 HEPA + Coconut Shell Activated Carbon
Chamber Temperature:Gen-4 Up to 70°C, Independent Chamber Heating
Automatic Leveling:Eddy Sensor Integrated into the Hotend Filament Detection:Run Out Sensor, and Tangle Detection (QIDI BOX required)
AI Camera Detection:Yes Auxiliary Part Cooling Fan:4-Pin PWM Fan with RPM Feedback
Hot End Cooling Fan:4-Pin PWM Fan with RPM Feedback Model Cooling Fan:4-Pin PWM Fan with RPM Feedback
Power Loss Recovery:Yes Input Shaping:Yes
Voltage:110V / 220–240V AC, 50/60Hz (region-specific models available) Rated Power:220 VAC: 1200W+280W (Chamber Heating)
110 VAC: 300W+280W (Chamber Heating)
Steady-State Power (25°C Ambient):
PLA: 190W, ABS: 500W
Camera:HD Camera, Timelapse Supported
Storage:64G EMMC and USB2.0 Flash Drive
Connectivity:Wi-Fi, USB Display Screen:4Inch 800*480 Touch Screen
Slicer:QIDI Studio and other third-party software, such as PrusaSlicer, Orca etc. (certain advanced features may not be supported) File Formats for Slicing:STL, OBJ, 3MF, STEP (.stp/.step), etc.

QIDI Q3D TDS

Download
Tips:
  • For better print quality, please use the QIDI official filaments.
  • The printer’s voltage specifications vary by sales region. Before use, please check the label next to the power socket on the printer to ensure the supplied voltage matches the indicated voltage.
  • To ensure the heatbed quickly reaches the needed temperature, the printer will maintain maximum power for about 3-5 minutes.
  • Special area: Lower-left 5×17 mm area and Lower-Right 11×17 mm area are non-printable by default. Remove cutter for full-plate printing.

Frequently Asked Questions For QIDI Q3D

What are the main differences between QIDI Q3D and QIDI Q2?

The QIDI Q3D upgrades nearly every subsystem over the Q2 — true dual-material printing is the headline.

  • Auxiliary nozzle — a second hotend for true dual-material printing, a second color, or soluble supports.
  • 260 x 260 x 260 mm build volume — the same total volume is available for dual-nozzle printing.
  • Gen-4 70 C heated chamber — up from the Q2's Gen-2 65 C, better for warp-prone engineering filaments.
  • Eddy sensor auto leveling — replaces the Q2's loadcell sensor for automatic bed leveling.
  • Extruder Thermal Monitor (ETM) — continuously tracks extruder temperature to prevent clogs.
  • 64 GB eMMC storage — double the Q2's 32 GB.
  • Cortex-M7 motion controller — upgraded from the Q2's Cortex-M4.
  • Dual-band 2.4/5 GHz Wi-Fi (802.11ac) and a 4-inch 800 x 480 touchscreen.

Bottom line: If you need two materials in one print or want to tackle ABS, PC and fiber-reinforced filaments, the Q3D is the clearer choice over the Q2.

What is the QIDI Q3D 3D printer?
The QIDI Q3D is a high speed CoreXY 3D printer built for dual-nozzle, multi-material printing. It combines a 260 x 260 x 260 mm main build volume, a Gen-4 independently heated chamber up to 70 C, a 350 C ceramic hotend, and an auxiliary nozzle for a second material or soluble supports high quality prints. It is designed for PLA, ABS, ASA, PA, PC and carbon/glass-fiber reinforced filaments.
What is the maximum print size of the QIDI Q3D?
Main nozzle printing: 260 x 260 x 260 mm. Auxiliary nozzle printing and dual-nozzle printing: 240 x 260 x 255 mm. Total volume for two nozzles: 260 x 260 x 260 mm. The printer itself measures 405 x 475 x 441 mm and weighs 29 kg net.
How fast is the QIDI Q3D 3D printer?
The tool head reaches a maximum movement speed of 600 mm/s, with a maximum printing acceleration of 20,000 mm/s squared. Input Shaping is supported to reduce ringing and keep surfaces clean at high speeds. The hotend uses ceramic plate heating and reaches 220 C from 30 C in about 40 seconds.
Does the QIDI Q3D support dual-color or multi-material printing?
Yes. The Q3D uses a main hotend plus an auxiliary hotend, so two different filaments can be printed in one job. The auxiliary hotend supports PLA (excluding PLA Aero), PETG, ABS, ASA, TPU 64D, PA, PC, PVA and support filaments including Support for PLA, PLA/PETG, ABS and PA/PET. The dual-nozzle printing area is 240 x 260 x 255 mm. For best quality, print PLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU 64D and PA/PET support with the main hotend.
What are the maximum hotend and heated bed temperatures of Q3D?
The hotend reaches up to 350 C and the heated bed up to 120 C. The hotend uses ceramic plate heating with a multi-metal structure and a thermocouple for accurate temperature measurement. The build plate is a double-sided PEI magnetic flexible plate on an aluminum silicone heated bed.
Why does the 70 C heated chamber matter, and is Q3D better than Q2 for engineering filaments?
The QIDI Q3D features Gen-4 independent chamber heating up to 70 C, compared with 65 C on the Q2. A hotter chamber keeps large ABS, ASA, PC and PA parts from warping and cracking and improves layer adhesion. The chamber uses a 4-pin PWM circulation fan with RPM feedback. Together with a 350 C hotend and a 3-in-1 air filter, this makes the Q3D well suited to engineering and fiber-reinforced filaments.
Can I change the nozzle on the QIDI Q3D?
Yes. The Q3D uses quick-swap bimetal nozzles. A 0.4 mm nozzle is standard, and 0.2 mm, 0.6 mm and 0.8 mm nozzles are optional. The main extruder is a direct drive unit with hardened steel dual gears and a 5.9:1 transmission ratio, and a filament cutter is built in.
What sensors and safety features does the QIDI Q3D have?
The Q3D includes an Eddy sensor integrated into the hotend for automatic leveling, a filament run-out sensor, Extruder Thermal Monitor (ETM), filament tangle detection (requires QIDI BOX), Input Shaping, power-loss recovery, AI camera detection, and RGB status lighting on the heated bed.
Does the QIDI Q3D work with QIDI BOX?
The Q3D supports QIDI BOX for filament tangle detection. Multi-material printing is handled by its built-in dual-nozzle system and can add up to 4 external QIDI BOXs.
Which filaments can the QIDI Q3D print?
The main hotend supports PLA, ABS, ASA, PETG, TPU, PA, PC and carbon/glass-fiber reinforced polymers. The auxiliary hotend supports PLA (excluding PLA Aero), PETG, ABS, ASA, TPU 64D, PA, PC, PVA, and support materials for PLA/PETG, ABS, PA/PET and PET. QIDI recommends official filaments for the best print quality.
Can the QIDI Q3D print supports?
Yes. With the auxiliary nozzle you can print PVA or dedicated support filaments such as Support for PLA/PETG, Support for ABS and Support for PA/PET while the main nozzle prints the model. This dual-extruder setup is ideal for complex geometries and overhangs that are difficult with a single nozzle.
Does the QIDI Q3D have air filtration?
Yes. It has a 3-in-1 air filter combining a G3 pre-filter, an H12 HEPA filter and coconut-shell activated carbon. Working with the chamber circulation fan, it reduces fumes and ultrafine particles when printing ABS, ASA or PC.
Does the QIDI Q3D have a camera and AI print monitoring?
Yes. The Q3D includes an HD camera with time-lapse support and AI camera detection for monitoring prints. You can control and check the printer from the 4-inch 800 x 480 touchscreen, the mobile app or the PC application.
How do I connect the QIDI Q3D to Wi-Fi, phone or PC?
The Q3D supports dual-band Wi-Fi (2.4 GHz and 5 GHz, IEEE 802.11a/b/g/n/ac) and USB, and works with a USB 2.0 flash drive. Control interfaces include the touchscreen, mobile app and PC application. Storage is 64 GB eMMC plus USB flash drive, so you can print files without a computer.
Which slicers and file formats does the QIDI Q3D support?
The Q3D works with QIDI Studio and third-party slicers such as PrusaSlicer and Orca, although some advanced features may not be supported. Supported file formats include STL, OBJ, 3MF and STEP (.stp/.step). Supported operating systems are Windows, macOS and Linux.
Are there non-printable areas on the QIDI Q3D build plate?
By default, the lower-left 5 x 17 mm area and the lower-right 11 x 17 mm area are non-printable because of the toolhead filament cutter. Remove the cutter if you need full-plate printing. The plate is a double-sided PEI magnetic flexible build plate for easy part removal.
How long does the QIDI Q3D take to heat up and how much power does it use?
The ceramic hotend heats from 30 C to 220 C in about 40 seconds. To bring the heatbed up quickly, the printer runs at maximum power for about 3-5 minutes. Steady-state power at 25 C ambient is about 190 W for PLA and 500 W for ABS. The 220 V model is rated 1200 W + 280 W for chamber heating; the 110 V model is 300 W + 280 W for chamber heating.
Does the QIDI Q3D support an extruder cooler?
An extruder cooler is optional on the Q3D and requires the Polar Cooler accessory. It is recommended when printing large size model, high-temperature or fiber-reinforced materials for long sessions.
Is the QIDI Q3D good for beginners and for home or office use?
Yes. Automatic leveling with the Eddy sensor, Input Shaping, power-loss recovery, filament run-out detection, AI camera monitoring and a 4-inch touchscreen make daily printing straightforward. The 70 C heated chamber, 3-in-1 air filter and sealed-printing compatibility also make it practical for home or office use with engineering filaments.
What voltage does the QIDI Q3D use?
The Q3D is supplied in region-specific models: 110 V or 220-240 V AC, 50/60 Hz. Always check the label next to the power socket on the printer before use to confirm the supplied voltage matches. The printer will maintain maximum power for about 3-5 minutes to heat the bed quickly.