How to Add Modifiers in QIDI Studio?
When using QIDI Studio, we often need to use modifiers. Modifiers are powerful tools that can adjust the printing speed, strength or surface characteristics of individual parts of a model without directly editing the model. This tutorial will guide you on how to add modifiers to your model in QIDI Studio to quickly implement complex design adjustments.
- Internal structure before using modifier
- Internal structure after using the modifier (the structural strength of the right part is higher than that of the left)
The above is a comparison of the effect before and after using the modifier. If you want to achieve similar adjustments, you can follow the steps below:
Steps
1.Right-click the model you want to adjust on the plate, select “Add Modifier”, and choose the appropriate shape.
2.Adjust the shape and position of the modifier so that it is exactly where you want the modification to take place.
3.Adjust the parameters on the left as needed. If you want to adjust the surface quality in the modifier section, select "Quality"; if you want to adjust the structural strength, select "Strength"; if you want to adjust the printing speed, select "Speed".
In the end
Through the above steps, you can flexibly use the modifier function in QIDI Studio to quickly optimize the model printing settings. Whether it is to improve the strength, optimize the surface quality, or adjust the printing speed of a part of the model, the modifier can significantly improve the model design efficiency and printing effect. Mastering this tool will make your 3D printing works more accurate!
