QIDI PC/ABS FR 3D Printer Filament
QIDI Flame Retardant PC/ABS alloy 3D Printing Filament. QIDI PC/ABS-FR is an excellent flame-resistant material which is based PC/ABS. It is safer and more environmentally friendly, while still maintaining the excellent mechanical properties and heat resistance of PC/ABS
Excellent Flame-resistant And Self-extinguishing Performance
By adding non-halogen flame retardant, PC/ABS has excellent self-extinguishing performance, and the flame-retardant grade can reach UL94 V-0 level (2mm).
Safe and non-toxic after burning
QIDI PC/ABS FR compared with materials with halogen flame retardants, QIDI PC/ABS-FR will not release much smoke and toxic gases after burning.
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | QIDI PEI Plate, QIDI Smooth Plate and Glass Plate | PC Plate |
| Hotend | Hardened Steel Nozzle ( 0.4 / 0.6 / 0.8 mm) Bimetal Nozzle ( 0.4 / 0.6 / 0.8 mm) |
Brass/Copper plated Nozzle (0.2/0.4/0.6/0.8 mm) |
| Glue | PVP glue/ 3D LAC adhesive spray | / |
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 70-80 °C，4-6 h |
| Printing and Keeping Container's Humidity | < 15% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 260 - 280 °C |
| Bed Temperature (with Glue) | 70-80 °C |
| Chamber Temperature | 60-80 °C |
| Printing Speed | < 30-120 mm/s |
| Physical Properties | |
| Density | 1.08 g/cm³ |
| Water absorption | 2.10 % |
| Heat Deflection Temperature | 102 °C |
| Melting Temperature | 250 °C |
| Melt Index | 4 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 40.10±0.14 MPa |
| Breaking Elongation Rate | 3.06±0.30 % |
| Bending Modulus | 2041.17±25.67 MPa |
| Bending Strength | 67.79±0.47 MPa |
| Impact Strength | 19.90±1.65KJ/m2 |
Printing Tips
• PC/ABS material in the printing process needs to have a higher ambient temperature to help release the residual stress in the molding process of the parts, in the printing process, please keep the printer closed to avoid warping and cracking of the printed parts. Please keep the printer closed during the printing process to avoid warping and cracking of the printed parts. If the device has a heating chamber function, it is recommended to set the heating chamber temperature at 60-80°C. If the device is equipped with a heating chamber, it is recommended that the temperature of the heating chamber be set between 60-80°C.
For more details please refer to: Filament Guide on WIKI.
Vacuum Aluminum Foil Packaging
According to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.
Product Size
QIDI TECH UltraPA filament 1.75mmWorks perfectly with most FDM 3Dprinters on the market.
