{"title":"High Performance Filament","description":"\u003cp\u003eQIDI  High Performance Filaments\u003c\/p\u003e\n\u003cp\u003ePA12-CF\u003c\/p\u003e\n\u003cp\u003eABS-GF25\u003c\/p\u003e\n\u003cp\u003ePET-CF\u003c\/p\u003e\n\u003cp\u003ePAHT-CF\u003c\/p\u003e\n\u003cp\u003ePETG-Tough\u003c\/p\u003e","products":[{"product_id":"qidi-tech-s-white-support-filament","title":"S-White Support Filament","description":"\u003ch4 style=\"text-align: left;\"\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75mm\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ch4 style=\"text-align: left;\"\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/h4\u003e\n\u003ch4 style=\"text-align: left;\"\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1kg\u003c\/h4\u003e\n\u003ch4 style=\"text-align: left;\"\u003e\n\u003cstrong\u003eFunction: \u003c\/strong\u003eAs a support filament for carbon fiber (PA12-CF)\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e【Smart Adhesion Technology】QIDI S-WHITE can provide a moderate bond strength to the main material such as PA12-CF, ensures that the main material can be molded to the support surface and can be easily separated from the support surface when the printing is done.\u003c\/li\u003e\n\u003cli\u003e【Quick Remove Technology】QIDI S-WHITE has significantly reduced its own interlayer bond strength through improvements, and can be easily torn apart during removal process.\u003c\/li\u003e\n\u003cli\u003e【ECO Friendly】No water or solvents required during use. QIDI S-WHITE will not produce water pollution, and is safe and environmentally friendly.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca title=\"QIDI Filament-Guide\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" target=\"_blank\"\u003eFilament Guide\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eRecommend Printing Parameters\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eExtruder Temperature:\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e280-300℃\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003cspan\u003ePrint Speed:\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e30-90 mm\/s\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBed Temperature:\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e40-80℃\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBed:\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePEI Film or Coated with PVP Glue\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eFan:\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOff\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0016\/7028\/3351\/files\/s-white_2.jpg?v=1669103937\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0016\/7028\/3351\/files\/s-white_1.jpg?v=1669103898\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Qidi Tech","offers":[{"title":"1kg \/ CHINA","offer_id":41972311851148,"sku":"SGREEN001","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/products\/S-white1_a45d4cdc-6dc2-4c45-8086-702bd8c7efa6.jpg?v=1747805400"},{"product_id":"qidi-carbon-fiber-filament-pa12-cf","title":"PA12-CF Filament","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eQIDI PA12-CF 3D Printer Filament\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eIt greatly improves the mechanical properties and heat resistance of the material, and releases the internal stress during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part and no warpage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750-PA12-CF_01.jpg?v=1716270499\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PA12-CF_01.jpg?v=1716270508\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eTemperature and Humidity Resistance\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI TECH PA12-CF filaments have strong tensile and flexural strength in both wet and dry conditions.\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750PAHT-CF_04.jpg?v=1715762981\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PAHT-CF_04.jpg?v=1715762696\" class=\"qdp_i\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PAHT-CF_05.jpg?v=1715762696\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch2 class=\"qdp_t\"\u003eDisplay of PA12-CF Prints\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI PA12-CF has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements.\u003c\/p\u003e\n\u003cbr\u003e\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750-PA12-CF_03.jpg?v=1716270499\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/698642dfb4d39956e8be20403af7fa13.jpg?v=1716187564\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eAccessory Compatibility\u003c\/h3\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003c!-- 第一行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eQIDI PEI Plate, HF Plate and Smooth Plate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003ePC Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eHardened Steel Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003cbr\u003eBimetal Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eBrass\/Copper plated Nozzle (0.2\/0.4\/0.6\/0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c!-- 第四行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003ePVP glue\/ 3D LAC adhesive spray\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局结束 --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e80-100 °C，4-6 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e280 - 300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e40-70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 30-120 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.09 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eWater absorption\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e2.46 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e78.4 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e167 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e5.1 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e76.95±1.17 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.63±0.10 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e3915.93±195.30 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e114.12±1.93 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e10.01±0.83 KJ\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"qdp_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv style=\"justify-content: center;\" class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\"\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI pet-CF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI pet-CF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t qdp_st\"\u003ePrinting Tips\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: left;\"\u003e• PA12-CF material is very sensitive to moisture. Printing after absorbing moisture will result in oozing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PAHT-CF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage. \u003cbr\u003e• After the printing, the printed part can be annealed to further improve the strength of QIDI PAHT-CF print part. Annealing conditions: place the printed part at 80-100°C for 4-6 hours and cool to room temperature naturally.\u003cbr\u003eFor more details please refer to: \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff;\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" title=\"Filament drying cover\" target=\"_blank\"\u003e Filament Guide\u003c\/a\u003e\u003c\/span\u003e on WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003c!-- 第一部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eVacuum Aluminum Foil Packaging\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eAccording to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_07.jpg?v=1715224683\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_08.jpg?v=1715067296\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eProduct Size\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI TECH PA12-CF filament 1.75mmWorks perfectly with most FDM 3Dprinters on the market.\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750PAHT-CF_03.jpg?v=1715750536\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PA12-CF_47e32eea-af00-46e2-80ce-3c9b7c13621f.jpg?v=1716189945\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv style=\"padding: 0;\" class=\"qdp_t-icpc\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\u003c!-- 第一条 --\u003e\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_10.jpg?v=1715067296\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_10_732a716f-46c6-40f4-b6f0-b3c0b84e57da.jpg?v=1715674034\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PA12-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_11.jpg?v=1715067296\" class=\"qdp_mi\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Qidi Tech","offers":[{"title":"CHINA","offer_id":41888469778572,"sku":"PA12-CF001","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/PA12-CF.jpg?v=1749103187"},{"product_id":"qidi-tech-abs-gf25-filament","title":"ABS-GF25 Filament","description":"\u003cdiv style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/ABS-GF25_44095b1d-e57a-4dd4-8a7b-da1e1c8f18eb.jpg?v=1709351022\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ca title=\"QIDI Filament-Guide\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" target=\"_blank\"\u003eFilament Guide\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Qidi Tech","offers":[{"title":"1 kg \/ CHINA \/ ABS-GF25 Black HEX Code #000000","offer_id":41888050249868,"sku":"ABS-GF25","price":35.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ ABS-GF25 Red HEX Code #c03023","offer_id":42267487436940,"sku":"ABS-GF25RD","price":35.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ ABS-GF25 Green HEX Code #00a247","offer_id":42267516174476,"sku":"ABS-GF25LV","price":35.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ ABS-GF25 Purple HEX Code #7f347c","offer_id":42267516207244,"sku":"ABS-GF25ZS","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/products\/ABS-GF25.jpg?v=1747113727"},{"product_id":"qidi-paht-cf-carbon-fiber-filament","title":"PAHT-CF (PPA-CF) Filament","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eQIDI PAHT-CF(PPA-CF) 3D Printer Filament\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI PAHT-CF(PPA-CF) is specially developed for FDM 3D printing process, the substrate is made of QIDI UltraPA(PPA)，high-temperature nylon with low moisture absorption, high strength, high abrasion resistance, excellent chemical resistance and high heat resistance, good dimensional stability and no warping during the printing process.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750PAHT-CF_01.jpg?v=1715750536\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PAHT-CF_01.jpg?v=1715749980\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eHigher Strength\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI TECH PAHT-CF (PPA-CF) filament has a flexural modulus of up to 6.9 GPa. Smart Fiber Reinforced Technology greatly improves the mechanical properties and heat resistance of the material, and releases the internal stress during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750PAHT-CF_02.jpg?v=1715750535\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PAHT-CF_02.jpg?v=1715749979\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eTemperature and Humidity Resistance\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI TECH PAHT-CF(PPA-CF) Filament's have good tensile and flexural strength performance in both wet and dry environments.\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750PAHT-CF_04.jpg?v=1715762981\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PAHT-CF_04.jpg?v=1715762696\" class=\"qdp_i\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PAHT-CF_05.jpg?v=1715762696\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch2 class=\"qdp_t\"\u003eDisplay of PAHT-CF(PPA-CF) Prints\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv style=\"padding: 0;\" class=\"qdp_t-icpc\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\n\u003c!-- 第一条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/2_464ff0d6-0b3c-445b-a172-4af38f796698.png?v=1715750546\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/2_464ff0d6-0b3c-445b-a172-4af38f796698.png?v=1715750546\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/4_0f65e4f1-c64e-4cbd-91a7-a0589c2aa825.png?v=1715750545\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/4_0f65e4f1-c64e-4cbd-91a7-a0589c2aa825.png?v=1715750545\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv style=\"padding: 0;\" class=\"qdp_t-icpc\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\n\u003c!-- 第一条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF06\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/3_1e7c4a32-3615-4955-b05d-10ab53d2515d.png?v=1715750545\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF06\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/3_1e7c4a32-3615-4955-b05d-10ab53d2515d.png?v=1715750545\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/1_d9878f77-780d-484e-8208-ebc3403d0f8e.png?v=1715750545\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF07\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/1_d9878f77-780d-484e-8208-ebc3403d0f8e.png?v=1715750545\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003cbr\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eAccessory Compatibility\u003c\/h3\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"width: 99.9582%;\"\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%;\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%;\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eMulti-color printing system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003e\/\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003eQIDI BOX, AMS, and other multi-color printing systems that require feeding through PTFE tubes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003eQIDI Cool Plate pro, QIDI PEI Plate, HF Plate and Smooth PEI Plate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003ePC Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003e\n\u003cp style=\"margin-top: 0; margin-bottom: 4px; color: #221551;\"\u003eHardened Steel Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/p\u003e\n\u003cp style=\"margin-top: 4px; margin-bottom: 4px; color: #221551;\"\u003eBimetal Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/p\u003e\n\u003cp style=\"margin-top: 4px; margin-bottom: 0; color: #221551;\"\u003eTungsten Carbide Bimetal Nozzle( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003e\n  \u003cp style=\"color: #e74c3c;\"\u003eBrass\/Copper plated Nozzle (0.2\/0.4\/0.6\/0.8 mm)\u003c\/p\u003e\n\u003cp style=\"color: #e74c3c;\"\u003eBimetal Nozzle ( 0.2 mm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003eGlue Stick \/ 3D LAC adhesive spray\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局结束 --\u003e \u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e80-100 °C，4-6 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e300 - 320 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e70-90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 30-120 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.20 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eWater absorption\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.37 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eHeat Deflection Temperature(Unannealed)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e84.8 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eHeat Deflection Temperature(Annealed)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e190.7°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e237 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e3.4 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e93.15±1.64 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.92±0.10 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e6727.22±382.20 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e144.00±1.87 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e10.37±0.27 KJ\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"qdp_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv style=\"justify-content: center;\" class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\"\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI pet-CF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI pet-CF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t qdp_st\"\u003ePrinting Tips\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: left;\"\u003e• PAHT material is very sensitive to moisture. Printing after absorbing moisture will result in oozing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PAHT-CF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage. \u003cbr\u003e• After the printing, the printed part can be annealed to further improve the strength of QIDI PAHT-CF print part. Annealing conditions: place the printed part at 80-100°C for 4-6 hours and cool to room temperature naturally.\u003cbr\u003eFor more details please refer to: \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff;\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" title=\"Filament drying cover\" target=\"_blank\"\u003e Filament Guide\u003c\/a\u003e\u003c\/span\u003e on WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003c!-- 第一部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eVacuum Aluminum Foil Packaging\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eAccording to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_07.jpg?v=1715224683\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_08.jpg?v=1715067296\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eProduct Size\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI TECH PAHT-CF filament 1.75mmWorks perfectly with most FDM 3Dprinters on the market.\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750PAHT-CF_03.jpg?v=1715750536\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/PAHT-CF_size.jpg?v=1742864866\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv style=\"padding: 0;\" class=\"qdp_t-icpc\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\u003c!-- 第一条 --\u003e\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_10.jpg?v=1715067296\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_10_732a716f-46c6-40f4-b6f0-b3c0b84e57da.jpg?v=1715674034\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PAHT-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_11.jpg?v=1715067296\" class=\"qdp_mi\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Qidi Tech","offers":[{"title":"CHINA","offer_id":41888482033804,"sku":"PAHT-CF001","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/1_1ffebf13-79c8-4433-b26f-186973adc9e6.jpg?v=1747113684"},{"product_id":"qidi-asa-filament","title":"ASA Filament","description":"\u003cdiv style=\"font-size: 2em; font-weight: bold;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" title=\"QIDI-FILAMENT-Guide\" target=\"_blank\"\u003e\u003cstrong\u003eFilament Guide\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"QIDI-ASA-3D-PRINT-FILAMENT\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/970x600.jpg?v=1696937327\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/970x300.jpg?v=1696937140\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/ASA_-4.jpg?v=1696937519\" alt=\"QIDI-ASA-High-Heat-Resistance\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/ASA_-4.jpg?v=1696937519\"\u003e\u003cimg alt=\"QIDI-ASA-UV-RESISTANCE-OUTDOOR-USE\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/ASA_-3.jpg?v=1696937391\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"QIDI-ASA-FILAMENT-PACKING\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/ASA_-5.jpg?v=1696937637\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"QIDI-ASA-PARAMETERS\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/ASA_-6.jpg?v=1696937719\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"QIDI-ASA-FILAMENT-COMPATIBLE\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/970x600-2.jpg?v=1696937755\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Qidi Tech","offers":[{"title":"1 kg \/ CHINA \/ Black HEX Code #000000","offer_id":41735930183820,"sku":"ASAHS","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ White HEX Code #FFFFFF","offer_id":41735930216588,"sku":"ASABS","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ Red HEX Code #C51223","offer_id":41735930249356,"sku":"ASARD","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ Blue HEX Code #0F55C6","offer_id":41735930314892,"sku":"ASABL","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ Green HEX Code #7FC61B","offer_id":41735930347660,"sku":"ASALV","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ Yellow HEX Code #F4DB67","offer_id":41735930380428,"sku":"ASAYL","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ Brown HEX Code #593729","offer_id":41735930413196,"sku":"ASABR","price":34.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ Gray HEX Code #BEBFC2","offer_id":41735930282124,"sku":"ASAGR","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/ASA_-2.jpg?v=1751520078"},{"product_id":"qidi-tpu95a-hf-filament","title":"TPU95A-HF Filament","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eQIDI TPU95A-HF filament, flexible material, high resilience, good compatibility, supports high speed printing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003ch4\u003e\u003ca href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" title=\"QIDI-FILAMENT-Guide\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFilament Guide\u003c\/strong\u003e\u003c\/a\u003e\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/QIDI-TPU95A-HF-IMG1.jpg?v=1696987349\" alt=\"QIDI-TPU95A-HF\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/QIDI-TPU95A-HF-IMG4.jpg?v=1696987567\" alt=\"QIDI-TPU95A-HF-High-speed\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/QIDI-TPU95A-HF-IMG5.jpg?v=1696987666\" alt=\"QIDI-TPU95A-HF-COMPATIBLE\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/QIDI-TPU95A-HF-IMG6.jpg?v=1696987726\" alt=\"QIDI-TPU95A-HF-PARAMETER\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/QIDI-TPU95A-HF-IMG7.jpg?v=1696987775\" alt=\"QIDI-TPU95A-HF-PACKING\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Qidi Tech","offers":[{"title":"1 kg \/ CHINA \/ Black HEX Code #000000","offer_id":41807056011404,"sku":"TPUHS","price":30.59,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ White HEX Code #FFFFFF","offer_id":41807056044172,"sku":"TPUBS","price":30.59,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ Transparent","offer_id":41807056076940,"sku":"TPUTM","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/TPU_-2.jpg?v=1751349131"},{"product_id":"qidi-tech-abs-gf25-0-5kg-filament","title":"ABS-GF25 Filament 0.5kg","description":"\u003cdiv style=\"font-weight: bold; font-size: 2em; text-align: left;\"\u003eSUPER DISCOUNT CLEARANCE! Limited Quantities - Shop Now!\u003c\/div\u003e\n\u003cdiv style=\"font-weight: bold; font-size: 2em; text-align: left;\"\u003e\n\u003cbr\u003e\n\u003ch2 style=\"text-align: left;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/ABS-GF25.jpg?v=1682498405\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" title=\"QIDI Filament-Guide\" target=\"_blank\"\u003eFilament Guide\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/h2\u003e\n\u003c\/div\u003e","brand":"Qidi Tech","offers":[{"title":"0.5kg \/ China","offer_id":41878424551564,"sku":"ABS-GF25-01","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/ABS-GF25_0.5kg.jpg?v=1751520165"},{"product_id":"qidi-tech-asa-areo-filament","title":"ASA-Aero Filament","description":"\u003cp\u003eOverview:\u003c\/p\u003e\n\u003cp class=\"Polaris-Header-Title_2qj8j\"\u003eQIDI ASA-Aero is a type of lightweight \u003ca title=\"3D Printer Filaments\" href=\"https:\/\/qidi3d.com\/collections\/qidi-3d-printer-filament\"\u003e3D printing filament\u003c\/a\u003e, specifically developed for the fields of aircraft models, ship models, drones, etc. ASA-Aero controls the foaming ratio of the material by adjusting the nozzle temperature during the printing process so that the density of the material extruded by the nozzle can be adjusted within a certain range. With this technique, it is easy to reduce the weight of the model. In the best-case scenario, the model weight can be reduced to 50% of a model printed with ordinary ASA. In addition to that, the matte texture of the printed surface can reduce the visibility of printed layers and thus give a smooth surface finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOn-Demand foaming technology \u003cbr\u003eQIDI ASA-Aero is a type of ASA filament that will start foaming with the aid of a blowing agent during the printing process. The blowing agent is in an unexcited state in the ASA filament before printing, During the printing process，by adjusting the printing temperature, the foaming ratio of the blowing agent can be easily controlled. The maximum foaming ratio can reach 250%. \u003c\/li\u003e\n\u003cli\u003eMeanwhile, QIDI ASA-Aero retains the original UV aging resistance and high heat resistance of ASA material, which is suitable for long-term use in high-temperature outdoor environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" title=\"QIDI Tech Filament-Guide\" target=\"_blank\"\u003eFilament Guide(QIDI Wiki)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRecommended printing conditions:\u003c\/p\u003e\n\u003ctable width=\"577\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"300\" style=\"width: 285.455px;\"\u003eRecommended Nozzle Diameter\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"width: 261.136px;\"\u003e≥0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"300\" style=\"width: 285.455px;\"\u003ePrint speed\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"width: 261.136px;\"\u003e30-90 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"300\" style=\"width: 285.455px;\"\u003eRecommended build surface treatment\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"width: 261.136px;\"\u003ePEI Film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"300\" style=\"width: 285.455px;\"\u003eBuild plate temperature\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"width: 261.136px;\"\u003e80-110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"300\" style=\"width: 285.455px;\"\u003eRaft separation distance\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"width: 261.136px;\"\u003e0.18-0.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"300\" style=\"width: 285.455px;\"\u003eCooling fan speed\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"width: 261.136px;\"\u003e0%-50%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"300\" style=\"width: 285.455px;\"\u003eRetraction distance\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"width: 261.136px;\"\u003eNO\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"300\" style=\"width: 285.455px;\"\u003eRetraction speed\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"width: 261.136px;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"300\" style=\"width: 285.455px;\"\u003eRecommended Support Material\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"width: 261.136px;\"\u003e\/\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"300\" style=\"width: 285.455px;\"\u003eAdditional Suggestions\u003cspan\u003e：\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"width: 261.136px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"577\" rowspan=\"5\" colspan=\"2\" style=\"width: 546.591px;\"\u003e1.Since ASA-Aero adopts the ‘on-demand foaming’ technology, the filament will continue to expand in the nozzle after being heated during the printing process. Therefore, it will cause unavoidable stringing during the nozzle movement. Even adjusting the retraction setting in the slicing software cannot solve this problem. Based on the above, it is recommended to turn off the retraction setting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"577\" rowspan=\"2\" colspan=\"2\" style=\"width: 546.591px;\"\u003e2.Because ASA materials have a high glass transition temperature, a certain ambient temperature（40-70°C） is required during printing to release the internal stress of the printed parts and reduce warping. When printing thin-walled models without any form of insulation, it is recommended to use nozzles with a diameter of 0.6mm or more to ensure the strength of printed parts and reduce shrinkage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"577\" rowspan=\"2\" colspan=\"2\" style=\"width: 546.591px;\"\u003e3.When printing with ASA-Aero filaments, please place the enclosed printer in a ventilated environment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/ASA-AERO_57be3fdd-a45d-4ccc-baf7-2afb49a8c05d.jpg?v=1702964550\"\u003e\u003c\/p\u003e","brand":"Qidi Tech","offers":[{"title":"Black HEX Code #000000 \/ CHINA","offer_id":41965456883852,"sku":"ASA-AREOHS","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Natural HEX Code #e5e9e3 \/ CHINA","offer_id":41965456949388,"sku":"ASA-AREONAT","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/1600-ASA-AERO-3.jpg?v=1745213732"},{"product_id":"qidi-tech-pc-abs-fr-filament","title":"PC\/ABS-FR Filament","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eQIDI PC\/ABS FR 3D Printer Filament\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI Flame Retardant PC\/ABS alloy 3D Printing Filament. QIDI PC\/ABS-FR is an excellent flame-resistant material which is based PC\/ABS. It is safer and more environmentally friendly, while still maintaining the excellent mechanical properties and heat resistance of PC\/ABS\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/PC-ABS-FR_01_802b6447-26d0-4c37-a945-7b38d6cfdfb8.jpg?v=1718936629\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/PC-ABS-FR_01.jpg?v=1718698938\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eExcellent Flame-resistant And Self-extinguishing Performance\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eBy adding non-halogen flame retardant, PC\/ABS has excellent self-extinguishing performance, and the flame-retardant grade can reach UL94 V-0 level (2mm).\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/PC-ABS-FR_02_b1ba2257-96f5-4670-b427-a7b2be9d5cb2.jpg?v=1718936629\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/PC-ABS-FR_02.jpg?v=1718698938\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/e64ab929349d41768f59dca1c938e6b6.mp4\" autoplay=\"autoplay\" controls=\"controls\" loop=\"loop\" muted=\"\" playsinline=\"\" data-mce-style=\"width: 100%;\" data-mce-src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/e64ab929349d41768f59dca1c938e6b6.mp4\"\u003e\u003c\/video\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eSafe and non-toxic after burning\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI PC\/ABS FR compared with materials with halogen flame retardants, QIDI PC\/ABS-FR will not release much smoke and toxic gases after burning.\u003c\/p\u003e\n\u003cbr\u003e\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/PC-ABS-FR_03_60950970-1787-438a-a0cd-0d0334c387ad.jpg?v=1718936628\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/PC-ABS-FR_03.jpg?v=1718698939\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eAccessory Compatibility\u003c\/h3\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003c!-- 第一行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eQIDI PEI Plate, QIDI Smooth Plate and Glass Plate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003ePC Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eHardened Steel Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003cbr\u003eBimetal Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eBrass\/Copper plated Nozzle (0.2\/0.4\/0.6\/0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c!-- 第四行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003ePVP glue\/ 3D LAC adhesive spray\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- table布局结束 --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e70-80 °C，4-6 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e260 - 280 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e70-80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eChamber Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e60-80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 30-120 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.08 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eWater absorption\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e2.10 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e102 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e250 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e4 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e40.10±0.14 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e3.06±0.30 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e2041.17±25.67 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e67.79±0.47 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e19.90±1.65KJ\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"qdp_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv style=\"justify-content: center;\" class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\"\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI pet-CF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI pet-CF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t qdp_st\"\u003ePrinting Tips\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: left;\"\u003e• PC\/ABS material in the printing process needs to have a higher ambient temperature to help release the residual stress in the molding process of the parts, in the printing process, please keep the printer closed to avoid warping and cracking of the printed parts. Please keep the printer closed during the printing process to avoid warping and cracking of the printed parts. If the device has a heating chamber function, it is recommended to set the heating chamber temperature at 60-80°C. If the device is equipped with a heating chamber, it is recommended that the temperature of the heating chamber be set between 60-80°C. \u003cbr\u003eFor more details please refer to: \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff;\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" title=\"Filament drying cover\" target=\"_blank\"\u003e Filament Guide\u003c\/a\u003e\u003c\/span\u003e on WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003c!-- 第一部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eVacuum Aluminum Foil Packaging\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eAccording to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/PC-ABS-FR_05_42e33ab6-6a52-420f-87d5-c78dc4ba7d95.jpg?v=1718936628\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/PC-ABS-FR_05.jpg?v=1718698938\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- 第二部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eProduct Size\u003c\/h2\u003e\n\u003cp align=\"center\" class=\"qdp_p\"\u003eQIDI TECH UltraPA filament 1.75mmWorks perfectly with most FDM 3Dprinters on the market.\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/PC-ABS-FR_04_454b8ccf-5034-4eee-a81b-fa19b4096d16.jpg?v=1718936628\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0587\/5282\/7532\/files\/PC-ABS-FR_04.jpg?v=1718698938\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv style=\"padding: 0;\" class=\"qdp_t-icpc\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第一条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/UltraPA_06.png?v=1717744504\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/UltraPA_06.jpg?v=1717744456\" class=\"qdp_i\"\u003e \u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PC\/ABS\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/UltraPA_07.jpg?v=1717744503\" class=\"qdp_mi\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Qidi Tech","offers":[{"title":"CHINA","offer_id":41965448265868,"sku":"PC-ABSNAT","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/1600-PC-ABS-FR-1.jpg?v=1752730679"},{"product_id":"pla-cf","title":"PLA-CF Filament","description":"\u003ch4\u003eOverview:\u003c\/h4\u003e\n\u003cp\u003eQIDI PLA-CF is chopped carbon fiber reinforced PLA FDM material. PLA-CF is easy to print and beginner-friendly like regular PLA. High-quality and affordably priced. The surface of the model will have a carbon fiber matte texture.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Texture \u0026amp; Minimized Layer Lines\u003c\/li\u003e\n\u003cli\u003eImproved Mechanical Properties\u003c\/li\u003e\n\u003cli\u003eStabilized Printing Dimension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"QIDI Tech Filament-Guide\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" target=\"_blank\"\u003eFilament Guide(QIDI Wiki)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/PLA-CF_8e47a3f2-81b8-4ac5-884c-ef72461dc223.jpg?v=1710489245\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4\u003eRecommended printing conditions:\u003c\/h4\u003e\n\u003ctable width=\"577\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 19px;\"\u003eRecommended Nozzle Diameter\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 19px;\"\u003e≥0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 19px;\"\u003eNozzle Temperature\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 19px;\"\u003e210-240\u003cspan\u003e°C\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 19px;\"\u003ePrint speed\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 19px;\"\u003e≤200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 19px;\"\u003eRecommended build surface treatment\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 19px;\"\u003ePEI Film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 19px;\"\u003eBuild plate temperature\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 19px;\"\u003e40-60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 19px;\"\u003eRaft separation distance\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 19px;\"\u003e0.08-0.12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 19px;\"\u003eCooling fan speed\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 19px;\"\u003e80%-100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 19px;\"\u003eRetraction distance\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 19px;\"\u003e1-3 mm\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 20.4688px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 20.4688px;\"\u003eRetraction speed\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 20.4688px;\"\u003e1800-3600 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 19px;\"\u003eChamber Temperature\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 19px;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd width=\"300\" style=\"height: 19px;\"\u003eAdditional Suggestions\u003cspan\u003e：\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd width=\"277\" style=\"height: 19px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd colspan=\"2\" rowspan=\"5\" width=\"577\" style=\"height: 143.969px;\"\u003eAfter the material is damp, there will be more printing oozing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 50°C for 4-6h to restore the printing quality of QIDI PLA-CF.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\u003c\/tr\u003e\n\u003ctr style=\"height: 103.969px;\"\u003e\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd colspan=\"2\" rowspan=\"4\" width=\"577\" style=\"height: 113.969px;\"\u003ePhaetus hardened steel and above grade nozzles shall be selected, which can effectively improve the print quality.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Qidi Tech","offers":[{"title":"PLA-CF (1kg) \/ CHINA \/ Black HEX Code #000000","offer_id":42167570956428,"sku":"PLA-CFBLK","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PLA-CF (1kg) \/ CHINA \/ Dark Red HEX Code #9A5C6B","offer_id":42167571021964,"sku":"PLA-CFRD","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PLA-CF (1kg) \/ CHINA \/ Olive Green HEX Code #67785A","offer_id":42167570989196,"sku":"PLA-CFGLV","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PLA-CF (1kg) \/ CHINA \/ Lavender Purple HEX Code #660066","offer_id":42281434677388,"sku":"PLA-CFSZS","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PLA-CF (1kg) \/ CHINA \/ Midnight Blue HEX Code #566B8F","offer_id":42281439821964,"sku":"PLA-CFMBL","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/1_e7c4aec7-9622-41ab-8547-97bc64aee7ce.jpg?v=1752730627"},{"product_id":"pet-cf-filament","title":"PET-CF Filament","description":"\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eQIDI PET-CF 3D Printer Filament\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI PET-CF is specially developed for FDM 3D printing process. Its substrate material is PET engineering plastic with low moisture absorption, high strength, creep resistance, excellent chemical resistance and high heat resistance. With good dimensional stability, no warpage and no shrinkage and no smell, no heating chamber is required during the printing process. It can be used with QIDI S-White Support Material to solve the problem of poor molding effect on the supporting surfaces of complex models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_01.jpg?v=1715224682\" alt=\"PET-CF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_01.jpg?v=1715067296\" alt=\"PET-CF\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_02.jpg?v=1715224679\" alt=\"PET-CF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_02.jpg?v=1715067296\" alt=\"PET-CF\"\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\" style=\"margin-top: 30px;\"\u003eSmooth High-speed Printing\u003c\/h3\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI PET-CF Filaments prints out models with great gloss and beautiful texture.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cvideo playsinline=\"\" poster=\"PET-CF-2.png\" muted=\"\" loop=\"loop\" controls=\"controls\" autoplay=\"autoplay\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/bb8742bdc7b44a7086f2d32dc32cc551.mp4\" style=\"width: 100%;\"\u003e\u003c\/video\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\" style=\"padding: 0;\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\n\u003c!-- 第一条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_03.jpg?v=1715224680\" alt=\"PET-CF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_03.jpg?v=1715067296\" alt=\"PET-CF\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eSmart Fiber Reinforced Technology\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI Smart Fiber Reinforcement Technology significantly improves the mechanical properties and heat resistance of the material and releases internal stresses through the fiber mesh structure during the printing process, resulting in good dimensional stability of the printed part without warping.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_04.jpg?v=1715224678\" alt=\"PET-CF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_05.jpg?v=1715067296\" alt=\"PET-CF\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eLow Creep\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eThe molecular chain structure of PET is highly regular and has a rigid benzene ring structure, so that PET has better mechanical properties and less deformation under long-term load. Compared with PA and PC materials, PET has better creep-resistance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\" style=\"padding: 0;\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\n\u003c!-- 第一条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_05.jpg?v=1715224680\" alt=\"PET-CF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_06.jpg?v=1715067296\" alt=\"PET-CF06\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eHigh Mechanical Strength\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003ePET filament carbon fiber has higher strength and rigidity, Better impact Resistance,and Wear Resistance than regular PETG material.Suitable for applications requiring torsional, tensile, and impact strength.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_06.jpg?v=1715224678\" alt=\"PET-CF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_07.jpg?v=1715067296\" alt=\"PET-CF07\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eLow Moisture Absorption\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI PET-CF has the characteristics of low moisture absorption, and the moisture absorption of this carbon fiber reinforced PET is only 0.5%.Moisture has no effect on the mechanical properties and dimensional stability of QIDI PET-CF.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eAccessory Compatibility\u003c\/h3\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003c!-- 第一行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eMulti-color printing system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eQIDI BOX\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eSupport filament\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003ca href=\"\/en-br\/products\/qidi-tech-s-white-support-filament\" title=\"S-white\"\u003eS-white\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eQIDI PEI Plate, HF Plate and Smooth Plate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003ePC Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eHardened Steel Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003cbr\u003eBimetal Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eBrass\/Copper plated Nozzle (0.2\/0.4\/0.6\/0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c!-- 第四行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eGlue Stick\/ 3D LAC adhesive spray\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局结束 --\u003e \u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"qdp_td\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e100 °C，4-8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e280 - 320 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e40-200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"qdp_td\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.3 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e148.8 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e86.7 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e251 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e6.8 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"qdp_td\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e72.51±1.39 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e2.49±0.22 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e5345.71±231.24 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e114.47±1.89 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e7.75±1.08 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"qdp_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\" style=\"justify-content: center;\"\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" style=\"display: flex; justify-content: center; align-items: center;\" title=\"QIDI pet-CF\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" style=\"width: 25px; margin-right: 20px;\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" style=\"display: flex; justify-content: center; align-items: center;\" title=\"QIDI pet-CF\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" style=\"width: 25px; margin-right: 20px;\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t qdp_st\"\u003ePrinting Tips\u003c\/h2\u003e\n\u003cp style=\"text-align: left;\" class=\"qdp_p\"\u003e• Although the moisture absorption of PET material is very low, it is very sensitive to moisture. Printing after absorbing moisture will result in oozing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PET-CF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage. \u003cbr\u003e• After the printing, the printed part can be annealed to further improve the strength of QIDI PET-CF print part. Annealing conditions: place the printed part at 80-100°C for 4-8 hours and cool to room temperature naturally. \u003cbr\u003e•\u003cstrong\u003eQIDI BOX Usage Tips: \u003c\/strong\u003eSince this filament uses a cardboard spool, it is recommended to use a \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/Spool_Adapter-199.3mf?v=1764406309\" title=\"Spool Adapter\"\u003espool adapter\u003c\/a\u003e (ABS Filament is recommended) on the cardboard spool when printing this filament with QIDI BOX to prevent the spool from being unable to rotate during material ejection.\u003cbr\u003eFor more details please refer to: \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca title=\"Filament drying cover\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" style=\"color: #2b00ff;\" target=\"_blank\"\u003e Filament Guide\u003c\/a\u003e\u003c\/span\u003e on WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003c!-- 第一部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eVacuum Aluminum Foil Packaging\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eAccording to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_07.jpg?v=1715224683\" alt=\"PET-CF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_08.jpg?v=1715067296\" alt=\"PET-CF\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eProduct Size\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI TECH PET-CF filament 1.75mm works perfectly with most FDM 3D printers on the market.\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/Spool_Upgrade_in_Progress-Engineering-en-PH_5b8f342a-fe16-49dc-ada3-cacf6bf203ad.png?v=1765768862\" alt=\"PET-CF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/Spool_Upgrade_in_Progress-Engineering-en_2e97891b-0ac8-4420-9d46-aef63a65867b.png?v=1765768863\" alt=\"PET-CF\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\" style=\"padding: 0;\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\u003c!-- 第一条 --\u003e\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/PET-CF-Specification-PH.png?v=1765768685\" alt=\"PET-CF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/PET-CF-Specification.png?v=1765768685\" alt=\"PET-CF\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Qidi Tech","offers":[{"title":"1 kg \/ CHINA","offer_id":42420938014860,"sku":"PET-CF","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/PET-CF_c2ae746d-bf96-41b5-bb40-ade1baaf75ba.jpg?v=1765764318"},{"product_id":"paht-gf-filament","title":"PAHT-GF (PPA-GF) Filament","description":"\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eQIDI PAHT-GF (PPA-GF) Filament\n\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eQIDI PAHT-GF is specially developed for FDM 3D printing process. The base material is high-temperature nylon, compounded with 15% glass fiber, and a mesh skeleton structure is formed inside. It has the characteristics of low moisture absorption, high strength, high wear resistance, excellent chemical resistance and high heat resistance. It has good dimensional stability during printing, no warping and shrinkage, exquisite matte surface, and more diverse colors.\u003c\/p\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/PAHT-GF_SJ_01.png?v=1739862830\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/paht-gf_01.png?v=1739774209\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eStable mechanical properties\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eThe addition of glass fiber significantly improves the mechanical strength of the material and solves the problem of warping and shrinkage in PPA printing. It also provides more color options and is suitable for manufacturing high-load materials with color requirements.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"width: 99.9582%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55.2227%;\" class=\"qdp_td\"\u003eFilament\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003ePA12-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003ePAHT-F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eUltraPA-CF25\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003ePAHT-GF\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003c!-- 第一行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd style=\"width: 55.2227%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eBending strength (X-Y，Annealed)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e124 MPa\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e157 MPa\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e168 MPa\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e137 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd style=\"width: 55.2227%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eBending modulus (X-Y，Annealed)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e4305 MPa\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e6983 MPa\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e7466 MPa\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e4135 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eHigh Heat Resistance\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eSmart Fiber Reinforced Technology greatly improves the heat resistance of the material, allowing your work to maintain stable performance in high temperature environments, suitable for application scenarios that require heat resistance.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"width: 99.9582%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55.3775%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eFilament\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003ePA12-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003ePAHT-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eUltraPA-CF25\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003ePAHT-GF\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003c!-- 第一行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd style=\"width: 55.3775%;\" class=\"qdp_td\"\u003eHeat Deflection Temperature(0.45MPa)\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e138.2°C\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e190.7°C\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e196.9°C\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e180.0°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eLow Moisture Sensitivity\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eQIDI PAHT-GF based on modified high temperature nylon, whose saturated moisture absorption rate is only one tenth of ordinary PA6, completely solving the defects of the mechanical properties and dimensional stability of nylon materials that change greatly after absorbed moisture.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"width: 99.9582%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55.3775%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eFilament\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003ePA12-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003ePAHT-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eUltraPA-CF25\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003ePAHT-GF\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003c!-- 第一行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd style=\"width: 55.3775%;\" class=\"qdp_td\"\u003eWater absorption\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e2.46%\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e1.37%\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e1.09%\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e1.75%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eSuper Abrasive Resistance\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eQIDI PAHT-GF has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003cbr\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eAccessory Compatibility\u003c\/h3\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"width: 99.9582%;\"\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%;\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%;\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eMulti-color printing system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003e\/\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003eQIDI BOX, AMS, and other multi-color printing systems that require feeding through PTFE tubes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eSpport\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003e\n    \u003ca href=\"\/en-br\/products\/qidi-tech-s-white-support-filament\" style=\"color: #221551; text-decoration: none;\"\u003eS-white\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003eQIDI Cool Plate pro, QIDI PEI Plate, HF Plate , Smooth PEI Plate, HF Plate, PC Plate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003e\n\u003cp style=\"margin-top: 0; margin-bottom: 4px; color: #221551;\"\u003eHardened Steel Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/p\u003e\n\u003cp style=\"margin-top: 4px; margin-bottom: 4px; color: #221551;\"\u003eBimetal Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/p\u003e\n\u003cp style=\"margin-top: 4px; margin-bottom: 0; color: #221551;\"\u003eTungsten Carbide Bimetal Nozzle( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003eBrass\/Copper plated Nozzle (0.2\/0.4\/0.6\/0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003eGlue Stick \/ 3D LAC adhesive spray\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局结束 --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e80-100 °C，4-8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e300 - 320 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e70-90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e30-160 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.27 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eWater absorption\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.75%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e237°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelt index\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e7.6 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 117.614px; width: 99.915%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\" style=\"width: 97.4316%; height: 19.6023px;\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\" style=\"height: 19.6023px;\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 36.5799%; height: 19.6023px;\"\u003eTensile strength(X-Y)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 60.8517%; height: 19.6023px;\"\u003e86.49±1.03 MPa\/90.50±2.57 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\" style=\"height: 19.6023px;\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 36.5799%; height: 19.6023px;\"\u003eElongation at break (X-Y)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 60.8517%; height: 19.6023px;\"\u003e1.78±0.07 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\" style=\"height: 19.6023px;\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 36.5799%; height: 19.6023px;\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 60.8517%; height: 19.6023px;\"\u003e4135.14±64.91 MPa\/4897.64±136.40 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\" style=\"height: 19.6023px;\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 36.5799%; height: 19.6023px;\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 60.8517%; height: 19.6023px;\"\u003e137.78±2.35 MPa\/140.77±5.28 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\" style=\"height: 19.6023px;\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 36.5799%; height: 19.6023px;\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 60.8517%; height: 19.6023px;\"\u003e7.29 ± 0.76 KJ\/㎡\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"qdp_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv style=\"justify-content: center;\" class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\"\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI PAHT-GF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI PAHT-GF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t qdp_st\"\u003ePrinting Tips\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: left;\"\u003e1.Nylon material is very easy to absorb moisture within the environment, and printing after absorbing moisture will result in oozing, extrusion with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PAHT-GF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage.\u003cbr\u003e2. After the material is damp, there will be more printing oozing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 80-100℃ for 4-6h to restore the printing quality of QIDI PAHT-GF.\u003cbr\u003e3. It is recommended to use hardened steel and above grade nozzles, which can effectively improve the print quality. Besides, it is recommended that the thickness of the heating block is longer 12mm.\u003cbr\u003e4. After the printing is completed, the QIDI PAHT-GF printed part can be annealed to further improve the strength of print part. Annealing conditions: leave printing part in an oven at 80-100℃ for 4 to 8 hours and cool to room temperature naturally.\u003cbr\u003e5.The filament has a high content of short-cut glass fiber and has been factory-dried, which makes it more brittle and prone to breaking. This is a normal phenomenon.\u003cbr\u003eFor more details please refer to: \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff;\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" title=\"Filament drying cover\" target=\"_blank\"\u003e Filament Guide\u003c\/a\u003e\u003c\/span\u003e on WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- 第一部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eVacuum Aluminum Foil Packaging\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eAccording to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_07.jpg?v=1715224683\" alt=\"PAHT-GF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_08.jpg?v=1715067296\" alt=\"PAHT-GF\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003c!-- 第二部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\" style=\"text-align: center;\"\u003eProduct Size\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003eQIDI TECH PAHT-GF filament 1.75mmWorks perfectly with most FDM 3Dprinters on the market.\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/PAHT-GF_SJ_02.png?v=1739862830\" alt=\"PAHT-GF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/paht-gf_02.png?v=1739774210\" alt=\"PAHT-GF\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\" style=\"padding: 0;\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\u003c!-- 第一条 --\u003e\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/PAHT-GF_SJ_03.png?v=1739862830\" alt=\"PAHT-GF\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/paht-gf_03.png?v=1739774209\" alt=\"PAHT-GF\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"QIDI Tech","offers":[{"title":"1 kg \/ CHINA \/ GRAY HEX Code #A2AAAD","offer_id":43445172076684,"sku":"PAHT-GFGRAY","price":62.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ BLUE HEX Code #7CA6DE","offer_id":43445172338828,"sku":"PAHT-GFBLUE","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/4_d1eb27ba-004a-4d55-9e61-efd0f61e23b4.jpg?v=1745992961"},{"product_id":"pet-gf-filament","title":"PET-GF Filament","description":"\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eQIDI PET-GF 3D Printer Filament\n\u003ch4 class=\"qdp_p\" style=\"text-align: center;\"\u003ePET-GF is specially developed for FDM 3D printing process. The substrate is made of PET engineering material, which has the characteristics of low moisture absorption, high strength, creep resistance, solvent resistance and high heat resistance. It has good dimensional stability during printing, no warping, no shrinkage, no odor, and no need for environmental insulation.\u003c\/h4\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/01_62244f85-0c4f-48df-80de-2a491e84d0d5.png?v=1741933399\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/1_0876b608-f982-40f3-b5d4-6bd12fb1fddd.jpg?v=1741933343\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eSay goodbye to warping\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003eThe molecular chain structure of PET is highly regular and has a rigid ring structure, which makes PET have good mechanical properties, small deformation under long-term load, and better creep resistance than PA and PC materials.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/02_9db81119-23ef-41c7-85eb-14a57899b0ea.png?v=1741933412\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/2_e1517e9d-c658-4c60-aa91-4c07377a2893.jpg?v=1741933364\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003ePET-GF prints are suitable for special environments\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003ePET-GF further enhances the rigidity, hardness and wear resistance of the material by adding chopped glass fibers. At the same time, glass fibers can inhibit the warping behavior of PET during printing, so that PET-GF only needs 70-80℃ base plate heating when printing, and does not require cavity insulation, making it very easy to print. Its 3D printed parts are suitable for use environments that require high heat resistance and long-term stress, such as 3D printer hot end parts.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/03_3e508b95-c18d-49b9-9c46-4c18cd597fd9.png?v=1741933424\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/3_b5c2c32c-e879-4292-88ce-4c5457305625.jpg?v=1741933380\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003ch1 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eQIDI PET-GF 3D Printer Filament\u003c\/h1\u003e\n\u003ch4 class=\"qdp_p\" style=\"text-align: center;\"\u003ePET-GF is specially developed for FDM 3D printing process. The substrate is made of PET engineering material, which has the characteristics of low moisture absorption, high strength, creep resistance, solvent resistance and high heat resistance. It has good dimensional stability during printing, no warping, no shrinkage, no odor, and no need for environmental insulation.\u003c\/h4\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/01_62244f85-0c4f-48df-80de-2a491e84d0d5.png?v=1741933399\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/1_0876b608-f982-40f3-b5d4-6bd12fb1fddd.jpg?v=1741933343\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eSay goodbye to warping\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003eThe molecular chain structure of PET is highly regular and has a rigid ring structure, which makes PET have good mechanical properties, small deformation under long-term load, and better creep resistance than PA and PC materials.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/02_9db81119-23ef-41c7-85eb-14a57899b0ea.png?v=1741933412\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/2_e1517e9d-c658-4c60-aa91-4c07377a2893.jpg?v=1741933364\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003ePET-GF prints are suitable for special environments\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003ePET-GF further enhances the rigidity, hardness and wear resistance of the material by adding chopped glass fibers. At the same time, glass fibers can inhibit the warping behavior of PET during printing, so that PET-GF only needs 70-80℃ base plate heating when printing, and does not require cavity insulation, making it very easy to print. Its 3D printed parts are suitable for use environments that require high heat resistance and long-term stress, such as 3D printer hot end parts.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/03_3e508b95-c18d-49b9-9c46-4c18cd597fd9.png?v=1741933424\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/3_b5c2c32c-e879-4292-88ce-4c5457305625.jpg?v=1741933380\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003cbr\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eAccessory Compatibility\u003c\/h3\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"width: 99.9582%;\"\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%;\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%;\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eMulti-color printing system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003eQIDI BOX\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eSpport\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003e\n    \u003ca href=\"\/en-br\/products\/qidi-tech-s-white-support-filament\" style=\"color: #221551; text-decoration: none;\"\u003eS-white\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003eQIDI Cool Plate pro, QIDI PEI Plate, HF Plate and Smooth PEI Plate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003ePC Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003e\n\u003cp style=\"margin-top: 0; margin-bottom: 4px; color: #221551;\"\u003eHardened Steel Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/p\u003e\n\u003cp style=\"margin-top: 4px; margin-bottom: 4px; color: #221551;\"\u003eBimetal Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/p\u003e\n\u003cp style=\"margin-top: 4px; margin-bottom: 0; color: #221551;\"\u003eTungsten Carbide Bimetal Nozzle( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003eBrass\/Copper plated Nozzle (0.2\/0.4\/0.6\/0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 11.2227%;\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 55.3775%; color: #221551;\"\u003eGlue Stick\/ 3D LAC adhesive spray\u003c\/td\u003e\n\u003ctd class=\"qdp_td\" style=\"width: 33.1161%; color: #e74c3c;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"qdp_td\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e100-120 °C, 4-8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container’s Humidity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e260 - 320 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e30-200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"qdp_td\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.38 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e148.8 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e86.7 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e251 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e5.3 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"qdp_td\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eUnannealed\/Annealed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e64.65±3.12 MPa\/70.86±2.86 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.14±0.11 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e3201.0±57.42 MPa\/3650.32±65.81 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e98.62±0.84 MPa\/114.87±3.0 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e12.68±1.61 kJ\/m²\/6.56±0.68 kJ\/m³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Suggestions\u003c\/strong\u003e\u003cbr\u003e1. Although the moisture absorption of PET material is very low, it is very sensitive to moisture. Printing after absorbing moisture will result in oozing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PET-GF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage. \u003cbr\u003e2. After the material is damp, there will be more printing oozing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 100-120℃ for 4-6h to restore the printing quality of QIDI PET-GF.\u003cbr\u003e3. Hardened steel and above grade nozzles shall be selected, which can effectively improve the print quality. Besides, it is recommended that the thickness of the heating block should no less than 12mm. \u003cbr\u003e4. After the printing, the printed part can be annealed to further improve the strength of QIDI PET-GF print part. Annealing conditions: place the printed part at 80-100℃ for 4-8 hours and cool to room temperature naturally.\u003cbr\u003e5.The filament has a high content of short-cut glass fiber and has been factory-dried, which makes it more brittle and prone to breaking. This is a normal phenomenon.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\"\u003e\n\u003cbr\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv style=\"justify-content: center;\" class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\"\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI PAHT-GF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI PAHT-GF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"qdp_td\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e100-120 °C, 4-8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container’s Humidity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e260 - 320 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e30-200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"qdp_td\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.38 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e148.8 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e86.7 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e251 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e5.3 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"qdp_td\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eUnannealed\/Annealed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e64.65±3.12 MPa\/70.86±2.86 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.14±0.11 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e3201.0±57.42 MPa\/3650.32±65.81 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e98.62±0.84 MPa\/114.87±3.0 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e12.68±1.61 kJ\/m²\/6.56±0.68 kJ\/m³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Suggestions\u003c\/strong\u003e\u003cbr\u003e1. Although the moisture absorption of PET material is very low, it is very sensitive to moisture. Printing after absorbing moisture will result in oozing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PET-GF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage. \u003cbr\u003e2. After the material is damp, there will be more printing oozing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 100-120℃ for 4-6h to restore the printing quality of QIDI PET-GF.\u003cbr\u003e3. Hardened steel and above grade nozzles shall be selected, which can effectively improve the print quality. Besides, it is recommended that the thickness of the heating block should no less than 12mm. \u003cbr\u003e4. After the printing, the printed part can be annealed to further improve the strength of QIDI PET-GF print part. Annealing conditions: place the printed part at 80-100℃ for 4-8 hours and cool to room temperature naturally.\u003cbr\u003e5.The filament has a high content of short-cut glass fiber and has been factory-dried, which makes it more brittle and prone to breaking. This is a normal phenomenon.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\"\u003e\n\u003cbr\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv style=\"justify-content: center;\" class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\"\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI PAHT-GF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI PAHT-GF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"QIDI Tech","offers":[{"title":"1 kg \/ CHINA \/ BLACK HEX Code #212322","offer_id":44070649757836,"sku":"PET-GFBLK","price":39.99,"currency_code":"USD","in_stock":true},{"title":"1 kg \/ CHINA \/ BROWN HEX Code #946037","offer_id":43445370683532,"sku":"PET-GFBRO","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/PET-GF_black.png?v=1745992980"},{"product_id":"tpu-aero","title":"TPU-Aero Filament","description":"\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n    \u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eQIDI TPU-Aero\n    \u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003eTPU-Aero is a medium-hard, reactive foaming flexible material developed\n        specifically for FFF printing technology. By controlling the printing temperature, different foaming ratios can\n        be achieved, thereby achieving different weight and hardness effects. Combined with excellent elasticity, wear\n        resistance and lightweight properties, it can be used in sports equipment, industrial parts, aerospace\n        prototypes and creative design.\u003c\/p\u003e\n    \u003cdiv class=\"qdp_tpc-ic\"\u003e\n        \u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/01.png?v=1748061323\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/1_3e4c0b9f-7356-4265-ae65-c670e5e324f5.png?v=1747811830\"\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c!-- 标题加文案加大图部分 --\u003e\n    \u003cdiv class=\"qdp qdp_mc\"\u003e\n        \u003cdiv class=\"qdp_tpc-ic\"\u003e\n            \u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n                \u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eLightweight and excellent interlayer adhesion\u003c\/h2\u003e\n                \u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003eTPU-Aero is more than 50% lighter than traditional TPU\n                    materials, has excellent interlayer adhesion, and the weight of the material can be controlled by\n                    adjusting the printing temperature. It is particularly suitable for weight-sensitive application\n                    scenarios such as sports equipment, aerospace, etc.\u003c\/p\u003e\n                \u003cbr\u003e\n            \u003c\/div\u003e\n            \u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/02_cc1304f1-fcfc-489a-9ed1-53d0aa04acaa.png?v=1748061323\"\u003e\n            \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/2_5dc9dad7-d0c1-44c0-949b-b86a0c606586.png?v=1747811827\"\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c!-- 标题加文案加大图部分 --\u003e\n    \u003cdiv class=\"qdp qdp_mc\"\u003e\n        \u003cdiv class=\"qdp_tpc-ic\"\u003e\n            \u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n                \u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eAdjustable weight and hardness\u003c\/h2\u003e\n                \u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003eBy adjusting the temperature, flow ratio or filling\n                    density, the hardness can be precisely controlled from 85A to 65A to achieve interesting different\n                    printing effects.\u003c\/p\u003e\n                \u003cbr\u003e\n            \u003c\/div\u003e\n            \u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/03_bac80a3f-1e69-4fb4-b4a7-16832378c8f5.png?v=1748061323\"\u003e\n            \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/3_7e7e3175-a41f-4beb-814a-f2318842d000.png?v=1747811830\"\u003e\n            \u003c!-- 第二张图片 --\u003e \u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/04.png?v=1748061322\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/4_89b4f6bb-6339-4415-a467-9e4242aed431.png?v=1747811827\"\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c!-- 标题加文案加大图部分 --\u003e\n    \u003cdiv class=\"qdp qdp_mc\"\u003e\n        \u003cdiv class=\"qdp_tpc-ic\"\u003e\n            \u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n                \u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eHigh resilience, high toughness\u003c\/h2\u003e\n                \u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003eTPU-Aero has excellent deformation recovery ability, which\n                    is suitable for parts that need to be deformed repeatedly. It has strong tear and impact resistance\n                    and is not easy to break under extreme stress.\u003c\/p\u003e\n                \u003cbr\u003e\n            \u003c\/div\u003e\n            \u003cdiv style=\"display: flex; justify-content: space-between; align-items: center; gap: 20px; padding: 20px; max-width: 1200px; margin: 0 auto;\"\u003e\n                \u003c!-- 动态图片 1 --\u003e \u003cimg class=\"qdp_i\" style=\"width: 48%; border-radius: 8px; box-shadow: 0 4px 8px rgba(0, 0, 0, 0.1); height: auto;\" alt=\"TPU-Aero1.gif\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/TPU-Aero1.gif?v=1747966322\"\u003e\n                \u003c!-- 动态图片 2 --\u003e \u003cimg class=\"qdp_i\" style=\"width: 48%; border-radius: 8px; box-shadow: 0 4px 8px rgba(0, 0, 0, 0.1); height: auto;\" alt=\"TPU-Aero2.gif\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/TPU-Aero2.gif?v=1747966327\"\u003e\n\u003c\/div\u003e\n            \u003c!-- 手机端两张动态图片1 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/TPU-Aero1.gif?v=1747966322\"\u003e\n            \u003c!-- 手机端两张动态图片2 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/TPU-Aero2.gif?v=1747966327\"\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c!-- 标题加文案加大图部分 --\u003e\n    \u003cdiv class=\"qdp qdp_mc\"\u003e\n        \u003cdiv class=\"qdp_tpc-ic\"\u003e\n            \u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n                \u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eMatte Finish, Fabric Texture\u003c\/h2\u003e\n                \u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003ePremium fabric-like texture meets engineering-grade\n                    performance,Stimulate your creative imagination\u003c\/p\u003e\n                \u003cbr\u003e\n            \u003c\/div\u003e\n            \u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/05_8b461fb5-b78b-47b8-9844-cb8b6acc6b36.png?v=1748061323\"\u003e\n            \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/5_e8840c67-38e1-41f1-80d0-4d1b60bd7ec5.png?v=1747811829\"\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"qdp qdp_mc\"\u003e\n        \u003cdiv class=\"qdp_tpc-ic\"\u003e\n            \u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n                \u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eLow water absorption\u003c\/h2\u003e\n                \u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003eIt can maintain stable performance in water or humid\n                    environment and will not expand\/deform due to water absorption\u003c\/p\u003e\n                \u003cbr\u003e\n            \u003c\/div\u003e\n            \u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/06_66778eac-2af2-4e41-acfd-b12bc59c43d4.png?v=1748061322\"\u003e\n            \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/6_ac9d5582-a6c5-48d1-b9c1-743ae5ca4b9f.png?v=1747811828\"\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv style=\"max-width: 1200px; margin: 0 auto; padding: 20px;\"\u003e\n    \u003cdiv style=\"background: white; border-radius: 8px; overflow: hidden; box-shadow: 0 5px 15px rgba(0,0,0,0.08); margin-bottom: 40px;\"\u003e\n        \u003cdiv style=\"padding: 18px; background: #221551; color: white; font-weight: bold; text-align: center; font-size: 18px; letter-spacing: 0.5px;\"\u003e\n            Compatibility\n        \u003c\/div\u003e\n\n        \u003cdiv style=\"overflow-x: auto;\"\u003e\n            \u003ctable style=\"width: 100%; border-collapse: collapse; min-width: 600px;\"\u003e\n                \u003cthead\u003e\n                    \u003ctr style=\"background: #f8f9fc;\"\u003e\n                        \u003cth style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; width: 20%; font-weight: 500; text-align: left; min-width: 120px;\"\u003e\n                            \n                        \u003c\/th\u003e\n                        \u003cth style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; width: 40%; font-weight: 500; text-align: left; min-width: 200px;\"\u003e\n                            Recommended\n                        \u003c\/th\u003e\n                        \u003cth style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; width: 40%; font-weight: 500; text-align: left; min-width: 200px;\"\u003e\n                            Not Recommended\n                        \u003c\/th\u003e\n                    \u003c\/tr\u003e\n                \u003c\/thead\u003e\n                \u003ctbody\u003e\n                    \u003ctr style=\"background: #f8f9fc;\"\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500;\"\u003e\n                            Multi-color printing system\n                        \u003c\/td\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500; color: #221551;\"\u003e\n                            \/\n                        \u003c\/td\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500; color: #e74c3c;\"\u003e\n                            QIDI BOX, AMS, and other multi-color printing systems that require feeding through PTFE tubes\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500;\"\u003e\n                            Spport Filament\n                        \u003c\/td\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500; color: #221551;\"\u003e\n                            \u003ca href=\"\/en-br\/products\/pla-basic\" style=\"color: #221551; text-decoration: none;\"\u003ePLA Basic\u003c\/a\u003e\n                        \u003c\/td\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500; color: #e74c3c;\"\u003e\n                            \/\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr style=\"background: #f8f9fc;\"\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500;\"\u003e\n                            Build Plate\n                        \u003c\/td\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500; color: #221551;\"\u003e\n                            QIDI Cool Plate pro, QIDI PEI Plate and Smooth Plate(Spray alcohol to help remove print parts), HF Plate, PC Plate\n                        \u003c\/td\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500; color: #e74c3c;\"\u003e\n                            \/\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500;\"\u003e\n                            Nozzle\n                        \u003c\/td\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500; color: #221551;\"\u003e\n                            \u003cp style=\"margin-top: 0; margin-bottom: 4px; color: #221551;\"\u003eBrass\/Copper plated Nozzle(0.4 \/ 0.6mm )\u003c\/p\u003e\n                            \u003cp style=\"margin-top: 4px; margin-bottom: 4px; color: #221551;\"\u003eHardened Steel Nozzle ( 0.4 \/ 0.6mm )\u003c\/p\u003e\n                            \u003cp style=\"margin-top: 4px; margin-bottom: 0; color: #221551;\"\u003eBimetal Nozzle ( 0.4 \/ 0.6mm )\u003c\/p\u003e\n                        \u003c\/td\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500; color: #e74c3c;\"\u003e\n                            \u003cp style=\"margin-top: 0; margin-bottom: 4px; color: #e74c3c;\"\u003eBrass\/Copper plated Nozzle(0.8 mm)\u003c\/p\u003e\n                            \u003cp style=\"margin-top: 4px; margin-bottom: 4px; color: #e74c3c;\"\u003eHardened Steel Nozzle (0.8 mm)\u003c\/p\u003e\n                            \u003cp style=\"margin-top: 4px; margin-bottom: 0; color: #e74c3c;\"\u003eBimetal Nozzle (0.8 mm)\u003c\/p\u003e\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr style=\"background: #f8f9fc;\"\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500;\"\u003e\n                            Glue\n                        \u003c\/td\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500; color: #221551;\"\u003e\n                            Glue Stick\n                        \u003c\/td\u003e\n                        \u003ctd style=\"padding: 14px 16px; border-bottom: 1px solid #eaeaea; font-weight: 500; color: #e74c3c;\"\u003e\n                            \/\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n    \u003cdiv class=\"qdp_table-row\"\u003e\n        \u003cdiv class=\"qdp_tbc\"\u003e\n            \u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n                \u003cthead class=\"qdp_th\"\u003e\n                    \u003ctr\u003e\n                        \u003ctd colspan=\"2\" class=\"qdp_td\"\u003eRecommended Printing Settings\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/thead\u003e\n                \u003ctbody\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e70-80 °C，4-6 h\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e230-270 °C\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e30-45 °C\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e30-50 mm\/s\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"qdp_tbc\"\u003e\n            \u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n                \u003cthead class=\"qdp_th\"\u003e\n                    \u003ctr\u003e\n                        \u003ctd colspan=\"2\" class=\"qdp_td\"\u003ePhysical Properties\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/thead\u003e\n                \u003ctbody\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e0.74 g\/cm³\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003eWater absorption\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e1.09 %\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003eVicat softening temperature\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e70.4°C\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003eMelt index\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e8 g\/10min(190°C,2.16kg)\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"qdp_tbc\"\u003e\n            \u003ctable style=\"height: 100%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n                \u003cthead class=\"qdp_th\"\u003e\n                    \u003ctr\u003e\n                        \u003ctd colspan=\"2\" class=\"qdp_td\"\u003eMechanical Properties\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/thead\u003e\n                \u003ctbody\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003eTensile strength(X-Y)\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e4.23±0.04 MPa\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003eTensile breaking strength (X-Y)\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e6.81±0.11 MPa\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr class=\"qdp_tr\"\u003e\n                        \u003ctd class=\"qdp_td\"\u003eelongation at break (X-Y)\u003c\/td\u003e\n                        \u003ctd class=\"qdp_td\"\u003e576.27±8.48 %\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"font-size: 0.8em; margin-top: 5px; text-align: center;\"\u003eSpecimens printed under the following conditions:\n    print temperature 250°C,Flow ratio 0.68,Nozzle size 0.4mm，Bed temp 45°C, Print speed 60mm\/s, Infill 100%, Infill\n    angle ±45°\u003c\/div\u003e\n\u003cp class=\"qdp_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n    \u003cdiv class=\"qdp_t-icpc\"\u003e\n        \u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n        \u003cbr\u003e\n        \u003cdiv class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\" style=\"justify-content: center;\"\u003e\n            \u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" style=\"display: flex; justify-content: center; align-items: center;\" title=\"QIDI UltraPA-CF25\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" style=\"width: 25px; margin-right: 20px;\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e\n                            \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n            \u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" style=\"display: flex; justify-content: center; align-items: center;\" title=\"QIDI UltraPA-CF25\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" style=\"width: 25px; margin-right: 20px;\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e\n                            \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n    \u003cdiv class=\"qdp qdp_mc\"\u003e\n        \u003cdiv class=\"qdp_tpc-ic\"\u003e\n            \u003cdiv class=\"qdp_t-p\"\u003e\n                \u003ch2 class=\"qdp_t qdp_st\"\u003ePrinting Tips\u003c\/h2\u003e\n                \u003col style=\"margin-left: 0; padding-left: 1.5em; text-align: left;\" class=\"printing-tips-list\"\u003e\n                    \u003cli style=\"text-align: left; margin-bottom: 12px;\"\u003eTPU materials are prone to moisture absorption\n                        when exposed to air. It is recommended to put TPU-Aero filaments in a drying oven (humidity\n                        controlled below 15%) immediately after opening the vacuum foil packaging. Unused filaments\n                        should be resealed in the original foil packaging.\u003c\/li\u003e\n                    \u003cli style=\"text-align: left; margin-bottom: 12px;\"\u003eFor TPU-Aero filaments that are exposed to air\n                        for a long time, it is recommended to put the filaments in a 70-80°C oven for 4-6 hours before\n                        printing to avoid problems such as bubbles, holes or drawing caused by moisture.\u003c\/li\u003e\n                    \u003cli style=\"text-align: left; margin-bottom: 12px;\"\u003eDue to the continuous expansion of the foaming\n                        material in the hot end cavity, leakage is inevitable during the stroke movement. Even adjusting\n                        the retraction distance and speed cannot improve this situation. It is recommended to disable\n                        the retraction function in the slicing software, print only one model at a time, or use the\n                        piece-by-piece printing function, and turn on the option to avoid crossing the outer wall to\n                        reduce drawing and leakage caused by long-distance idling and jumping.\u003c\/li\u003e\n                    \u003cli style=\"text-align: left; margin-bottom: 12px;\"\u003eSome of PEI textured or PEI film build plates may\n                        exhibit excessive adhesion to TPU materials, making printed parts difficult to remove. It is\n                        recommended to use alcohol to remove the parts.\u003c\/li\u003e\n                \u003c\/ol\u003e\n                \u003cp style=\"text-align: left;\" class=\"qdp_p\"\u003e\u003cbr\u003eFor more details please refer to: \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca title=\"Filament drying cover\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" style=\"color: #2b00ff;\" target=\"_blank\"\u003e Filament Guide\u003c\/a\u003e\u003c\/span\u003e on WIKI.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n    \u003ch2 style=\"text-align: center;\" class=\"qdp_t-p\"\u003eVacuum Aluminum Foil Packaging\u003c\/h2\u003e\n    \u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003eAccording to the test, the water vapor transmission rate of ordinary\n        sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is\n        only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n    \u003cdiv class=\"qdp_tpc-ic\"\u003e\n        \u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"TPU-Aero\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_07.jpg?v=1715224683\" class=\"qdp_mi\"\u003e\n            \u003c!-- PC端图片 --\u003e \u003cimg alt=\"TPU-Aero\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_08.jpg?v=1715067296\" class=\"qdp_i\"\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003c!-- 第二部分 --\u003e\n    \u003cdiv class=\"qdp_t-p\"\u003e\n        \u003ch2 style=\"text-align: center;\" class=\"qdp_t\"\u003eProduct Size\u003c\/h2\u003e\n        \u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eQIDI TECH TPU-Aero filament 1.75mmWorks perfectly with most FDM\n            3Dprinters on the market.\u003c\/p\u003e\n        \u003cdiv class=\"qdp_ic-p\"\u003e\n            \u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"TPU-Aero\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/tpu-aero_phone_2.png?v=1748591034\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"TPU-Aero\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/tpu-aero_2_pc.png?v=1748591035\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"qdp qdp_mc\"\u003e\n            \u003cdiv style=\"padding: 0;\" class=\"qdp_t-icpc\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n                \u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\u003c!-- 第一条 --\u003e\u003c\/div\u003e\n                \u003c!-- 第二条 --\u003e\n                \u003cdiv class=\"qdp_ic-p\"\u003e\n                    \u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"TPU-Aero\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/tpu-aero_phone.png?v=1748591033\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"TPU-Aero\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/tpu-aero_pc.png?v=1748591034\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n                \u003c\/div\u003e\n                \u003c!-- 第二条 --\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Qidi Tech Online Store","offers":[{"title":"Black HEX Code #000000 \/ China","offer_id":44188008284300,"sku":"TPU-AeroHS","price":45.99,"currency_code":"USD","in_stock":true},{"title":"White HEX Code #FFFFFF \/ China","offer_id":44188010152076,"sku":"TPU-AeroBS","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/646b1e5eba51bbe07f5098f3a478efc1.png?v=1751349107"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/collections\/QIDI-ABS-GF25-PA12-CF-PET-CF.jpg?v=1692164259","url":"https:\/\/qidi3d.com\/en-br\/collections\/high-performance-filaments.oembed","provider":"Qidi Tech Online Store","version":"1.0","type":"link"}